Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2022-09-01 → 2023-08-31 |
| MR | Monitoring | Resolved | 2022-09-01 → 2023-08-31 |
| MR | Monitoring | Resolved | 2022-09-01 → 2023-08-31 |
| MR | Monitoring | Resolved | 2022-09-01 → 2023-08-31 |
| MR | Monitoring | Resolved | 2017-01-01 → 2017-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2024 |
| Fluoride | 265.5 µg/L 6.6% of the EPA limit 4000 µg/L
worst single sample: 270 µg/L | 10/10 | SYR4 | 2013–2019 |
| TTHM | 13.664 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 14.5 µg/L | 9/9 | SYR4 | 2012–2019 |
| Chloroform | 7.31 µg/L No EPA limit set
worst single sample: 8.06 µg/L | 7/8 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 19.779 µg/L 33% of the EPA limit 60 µg/L
worst single sample: 27 µg/L | 7/9 | SYR4 | 2012–2019 |
| Arsenic | 5.84 µg/L 58% of the EPA limit 10 µg/L
worst single sample: 6 µg/L | 5/5 | SYR4 | 2012–2015 |
| Bromodichloromethane | 2.8 µg/L No EPA limit set
worst single sample: 3.11 µg/L | 5/8 | SYR4 | 2012–2017 |
| Barium | 20.8 µg/L 1% of the EPA limit 2000 µg/L
worst single sample: 21 µg/L | 3/5 | SYR4 | 2012–2015 |
| Dibromochloromethane | 1.175 µg/L No EPA limit set
worst single sample: 1.24 µg/L | 3/8 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 2.177 µg/L No EPA limit set
worst single sample: 2.23 µg/L | 3/4 | SYR4 | 2012–2014 |
| Gross Beta Particle Activity | 15.1 pCi/L No EPA limit set | 3/3 | SYR4 | 2016 |
| Trichloroacetic Acid | 0.8045 µg/L No EPA limit set
worst single sample: 0.8100 µg/L | 2/4 | SYR4 | 2012–2014 |
| Mercury | 0.0200 µg/L 1% of the EPA limit 2 µg/L | 1/5 | SYR4 | 2012–2015 |
| Selenium | 5.4 µg/L 11% of the EPA limit 50 µg/L | 1/5 | SYR4 | 2012–2015 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Charlotte Hall
Is Charlotte Hall tap water safe to drink?
EPA monitoring detected 14 contaminants in Charlotte Hall's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Charlotte Hall's water?
EPA monitoring detected Lead, Fluoride, TTHM, Chloroform, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Charlotte Hall serve?
Charlotte Hall reports serving 615 people in Maryland, per its EPA record.
Has Charlotte Hall had any water quality violations?
The EPA has 5 violations on file for Charlotte Hall, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.