Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| Other | Monitoring | Resolved | 2013-07-01 |
| Other | Monitoring | Resolved | 2013-07-01 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-12-31 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-12-31 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-12-31 |
| MR | Monitoring | Resolved | 2011-10-01 |
| MR | Monitoring | Resolved | 2002-02-01 → 2002-02-28 |
| MR | Monitoring | Resolved | 2002-02-01 → 2002-02-28 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0033 mg/L 22% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Bromodichloromethane | 2.984 µg/L No EPA limit set
worst single sample: 3.02 µg/L | 2/3 | SYR4 | 2012–2014 |
| Cadmium | 1.055 µg/L 21% of the EPA limit 5 µg/L
worst single sample: 1.1 µg/L | 2/5 | SYR4 | 2012–2018 |
| Chloroform | 6.6375 µg/L No EPA limit set
worst single sample: 6.8 µg/L | 2/3 | SYR4 | 2012–2014 |
| Dichloroacetic Acid | 4.606 µg/L No EPA limit set
worst single sample: 4.64 µg/L | 2/2 | SYR4 | 2013–2014 |
| TTHM | 9.0335 µg/L 11% of the EPA limit 80 µg/L
worst single sample: 9.1 µg/L | 2/3 | SYR4 | 2013–2017 |
| Total Haloacetic Acids (HAA5) | 11.107 µg/L 19% of the EPA limit 60 µg/L
worst single sample: 11.22 µg/L | 2/3 | SYR4 | 2013–2017 |
| Trichloroacetic Acid | 4.2065 µg/L No EPA limit set
worst single sample: 4.32 µg/L | 2/2 | SYR4 | 2013–2014 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 1/5 | SYR4 | 2012–2018 |
| Chromium | 0.8000 µg/L 0.8% of the EPA limit 100 µg/L | 1/5 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 0.3000 pCi/L 6% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2018 |
| Dibromoacetic Acid | 3.46 µg/L No EPA limit set | 1/2 | SYR4 | 2013–2014 |
| Dibromochloromethane | 1.2 µg/L No EPA limit set | 1/3 | SYR4 | 2012–2014 |
| Gross Alpha, Excl. Radon And U | 2.4 pCi/L 16% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2018 |
| Gross Beta Particle Activity | 4.2 pCi/L No EPA limit set | 1/1 | SYR4 | 2018 |
| Monochloroacetic Acid | 1.75 µg/L No EPA limit set | 1/2 | SYR4 | 2013–2014 |
56 contaminants tested, none detected
Utility contact
Frequently asked questions about Pin Oak Apartments
Is Pin Oak Apartments tap water safe to drink?
EPA monitoring detected 16 contaminants in Pin Oak Apartments's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pin Oak Apartments's water?
EPA monitoring detected Lead, Bromodichloromethane, Cadmium, Chloroform, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Pin Oak Apartments serve?
Pin Oak Apartments reports serving 40 people in Maryland, per its EPA record.
Has Pin Oak Apartments had any water quality violations?
The EPA has 21 violations on file for Pin Oak Apartments, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.