Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2023-10-01 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Fluoride | 1400 µg/L 35% of the EPA limit 4000 µg/L | 7/7 | SYR4 | 2013–2019 |
| Barium | 33.5 µg/L 1.7% of the EPA limit 2000 µg/L
worst single sample: 34 µg/L | 6/7 | SYR4 | 2013–2019 |
| Bromodichloromethane | 1.19 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 6/6 | SYR4 | 2012–2019 |
| Chloroform | 4.1175 µg/L No EPA limit set
worst single sample: 4.72 µg/L | 6/6 | SYR4 | 2012–2019 |
| Nitrate | 1000 µg/L 10% of the EPA limit 10000 µg/L | 4/12 | SYR4 | 2012–2014 |
| Dibromochloromethane | 0.8000 µg/L No EPA limit set | 3/5 | SYR4 | 2012–2015 |
| TTHM | 4.263 µg/L 5.3% of the EPA limit 80 µg/L
worst single sample: 4.27 µg/L | 3/3 | SYR4 | 2013–2017 |
| Total Haloacetic Acids (HAA5) | 4.55 µg/L 7.6% of the EPA limit 60 µg/L
worst single sample: 4.6 µg/L | 3/3 | SYR4 | 2013–2017 |
| Chromium | 2.19 µg/L 2.2% of the EPA limit 100 µg/L
worst single sample: 2.2 µg/L | 2/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.969 µg/L No EPA limit set
worst single sample: 2 µg/L | 2/2 | SYR4 | 2013–2014 |
| Trichloroacetic Acid | 2.5025 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 2/2 | SYR4 | 2013–2014 |
| Gross Alpha, Excl. Radon And U | 2.6 pCi/L 17% of the EPA limit 15 pCi/L | 1/2 | SYR4 | 2016–2019 |
| Gross Beta Particle Activity | 7.9 pCi/L No EPA limit set | 1/1 | SYR4 | 2016 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Newtown Village
Is Newtown Village tap water safe to drink?
EPA monitoring detected 14 contaminants in Newtown Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Newtown Village's water?
EPA monitoring detected Lead, Fluoride, Barium, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Newtown Village serve?
Newtown Village reports serving 170 people in Maryland, per its EPA record.
Has Newtown Village had any water quality violations?
The EPA has 17 violations on file for Newtown Village, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.