Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2021-11-30 |
| TT | Health-based | Resolved | 2021-11-30 |
| TT | Health-based | Resolved | 2021-11-30 |
| TT | Health-based | Resolved | 2021-11-30 |
| TT | Health-based | Resolved | 2021-04-01 |
| TT | Health-based | Resolved | 2021-04-01 |
| TT | Health-based | Resolved | 2021-04-01 |
| TT | Health-based | Resolved | 2020-11-30 |
| TT | Health-based | Resolved | 2020-11-30 |
| MR | Monitoring | Unaddressed | 2025-01-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0160 mg/L 107% above the EPA limit of 0.0150 mg/L | 12/12 | LCR | 2020 |
| Bromodichloromethane | 2.29 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 6/6 | SYR4 | 2012–2017 |
| Chloroform | 3.4375 µg/L No EPA limit set
worst single sample: 3.45 µg/L | 6/6 | SYR4 | 2012–2017 |
| Barium | 270.6 µg/L 14% of the EPA limit 2000 µg/L
worst single sample: 272 µg/L | 5/5 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.12 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 5/6 | SYR4 | 2012–2017 |
| Fluoride | 368 µg/L 9.2% of the EPA limit 4000 µg/L
worst single sample: 370 µg/L | 5/5 | SYR4 | 2013–2019 |
| Chromium | 1.9 µg/L 1.9% of the EPA limit 100 µg/L
worst single sample: 2 µg/L | 3/7 | SYR4 | 2013–2019 |
| TTHM | 7.161 µg/L 9% of the EPA limit 80 µg/L
worst single sample: 7.39 µg/L | 3/3 | SYR4 | 2012–2017 |
| Bromoform | 1.0895 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 2/6 | SYR4 | 2012–2017 |
| Dichloroacetic Acid | 2.028 µg/L No EPA limit set
worst single sample: 2.04 µg/L | 2/2 | SYR4 | 2012–2014 |
| Total Haloacetic Acids (HAA5) | 2.5625 µg/L 4.3% of the EPA limit 60 µg/L
worst single sample: 2.59 µg/L | 2/3 | SYR4 | 2012–2017 |
| Antimony, Total | 0.5000 µg/L 8.3% of the EPA limit 6 µg/L | 1/7 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 6.9 pCi/L No EPA limit set | 1/1 | SYR4 | 2016 |
| Trichloroacetic Acid | 0.7900 µg/L No EPA limit set | 1/2 | SYR4 | 2012–2014 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Cecilton
Is Town of Cecilton tap water safe to drink?
EPA monitoring detected 14 contaminants in Town of Cecilton's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Cecilton's water?
EPA monitoring detected Lead, Bromodichloromethane, Chloroform, Barium, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Town of Cecilton serve?
Town of Cecilton reports serving 477 people in Maryland, per its EPA record.
Has Town of Cecilton had any water quality violations?
The EPA has 39 violations on file for Town of Cecilton, of which 9 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.