← Maryland

Tap water quality report

Town of Denton

EPA monitoring tested this supplier for 107 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

107
contaminants tested
18
detected
4,500
people served
4
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Caroline

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

4
health-based violations
8
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MCL Health-based Resolved 2009-11-01 → 2009-11-30
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2010-01-01 → 2010-12-31
MR Monitoring Resolved 2006-09-01 → 2006-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Arsenic
4.74 µg/L 47%
of the EPA limit 10 µg/L
worst single sample: 5 µg/L
14/14 SYR4 2012–2019
Chloroform
26.52 µg/L
No EPA limit set
worst single sample: 27.9 µg/L
13/15 SYR4 2012–2019
Fluoride
1446 µg/L 36%
of the EPA limit 4000 µg/L
worst single sample: 1500 µg/L
13/13 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
13/13 LCR 2023
Gross Alpha, Excl. Radon And U
10.56 pCi/L 70%
of the EPA limit 15 pCi/L
worst single sample: 11.4 pCi/L
9/9 SYR4 2014–2019
TTHM
32.654 µg/L 41%
of the EPA limit 80 µg/L
worst single sample: 33.69 µg/L
9/9 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
15.312 µg/L 26%
of the EPA limit 60 µg/L
worst single sample: 15.4 µg/L
9/9 SYR4 2013–2019
Bromodichloromethane
4.795 µg/L
No EPA limit set
worst single sample: 4.9 µg/L
8/14 SYR4 2012–2017
Gross Beta Particle Activity
7.78 pCi/L
No EPA limit set
worst single sample: 8.2 pCi/L
8/8 SYR4 2014–2015
Combined Radium (-226 And -228)
0.7400 pCi/L 15%
of the EPA limit 5 pCi/L
worst single sample: 0.8000 pCi/L
7/8 SYR4 2014–2015
Chromium
14.375 µg/L 14%
of the EPA limit 100 µg/L
worst single sample: 14.5 µg/L
6/14 SYR4 2012–2019
Dichloroacetic Acid
6.64 µg/L
No EPA limit set
worst single sample: 7.5 µg/L
5/5 SYR4 2013–2015
Trichloroacetic Acid
6.22 µg/L
No EPA limit set
worst single sample: 7.1 µg/L
5/5 SYR4 2013–2015
Dibromochloromethane
0.8985 µg/L
No EPA limit set
worst single sample: 0.9000 µg/L
4/14 SYR4 2012–2017
Lithium
20 µg/L
No EPA limit set
3/3 UCMR-5 2025
Barium
0.1200 µg/L 0%
of the EPA limit 2000 µg/L
1/15 SYR4 2012–2019
Selenium
2.6 µg/L 5.2%
of the EPA limit 50 µg/L
1/15 SYR4 2012–2019
Thallium, Total
0.0300 µg/L 1.5%
of the EPA limit 2 µg/L
1/14 SYR4 2012–2019
89 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitrateNitrate-NitriteNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
CHANDLER, MARK
Phone
410-479-5446
Email
[email protected]

Frequently asked questions about Town of Denton

Is Town of Denton tap water safe to drink?

EPA monitoring detected 18 contaminants in Town of Denton's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Town of Denton's water?

EPA monitoring detected Arsenic, Chloroform, Fluoride, Lead, Gross Alpha, Excl. Radon And U, and others. The full list with the level and data source for each is above.

How many people does Town of Denton serve?

Town of Denton reports serving 4,500 people in Maryland, per its EPA record.

Has Town of Denton had any water quality violations?

The EPA has 8 violations on file for Town of Denton, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.