Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1995-10-15 → 1995-11-15 |
| MCL | Health-based | Archived | 1995-09-15 → 1995-10-15 |
| MCL | Health-based | Archived | 1995-09-15 → 1995-10-15 |
| Other | Monitoring | Resolved | 2017-10-01 |
| Other | Monitoring | Resolved | 2017-10-01 |
| MR | Monitoring | Resolved | 2014-07-01 → 2015-06-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2015-06-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2015-06-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2015-06-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2015-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 10.35 µg/L 69% of the EPA limit 15 µg/L
worst single sample: 12 µg/L | 34/44 | SYR4 | 2012–2019 |
| Copper | 310 µg/L 24% of the EPA limit 1300 µg/L
worst single sample: 400 µg/L | 19/44 | SYR4 | 2012–2019 |
| Lead | 0.0025 mg/L 17% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Bromodichloromethane | 15.935 µg/L No EPA limit set
worst single sample: 16 µg/L | 14/14 | SYR4 | 2013–2019 |
| Bromoform | 2.07 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 14/14 | SYR4 | 2013–2019 |
| Chloroform | 13.47 µg/L No EPA limit set
worst single sample: 13.6 µg/L | 14/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.4 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 13.14 µg/L No EPA limit set
worst single sample: 13.4 µg/L | 14/14 | SYR4 | 2013–2019 |
| TTHM | 44.245 µg/L 55% of the EPA limit 80 µg/L
worst single sample: 44.7 µg/L | 14/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 35.755 µg/L 60% of the EPA limit 60 µg/L
worst single sample: 39.2 µg/L | 14/14 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 6.155 µg/L No EPA limit set
worst single sample: 7 µg/L | 14/14 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 9.9 µg/L No EPA limit set
worst single sample: 10.2 µg/L | 13/14 | SYR4 | 2013–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 6/6 | SYR4 | 2014–2019 |
| Fluoride | 342.5 µg/L 8.6% of the EPA limit 4000 µg/L
worst single sample: 350 µg/L | 6/6 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 1.53705 pCi/L 31% of the EPA limit 5 pCi/L
worst single sample: 1.623 pCi/L | 4/4 | SYR4 | 2016–2019 |
| Monochloroacetic Acid | 23.3 µg/L No EPA limit set
worst single sample: 24 µg/L | 3/14 | SYR4 | 2013–2019 |
| Barium | 139.5 µg/L 7% of the EPA limit 2000 µg/L
worst single sample: 140 µg/L | 2/6 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Phthalate | 0.5900 µg/L 9.8% of the EPA limit 6 µg/L | 2/6 | SYR4 | 2014–2019 |
| Gross Beta Particle Activity | 2.7825 pCi/L No EPA limit set
worst single sample: 2.84 pCi/L | 2/6 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 4.1 µg/L No EPA limit set | 1/14 | SYR4 | 2013–2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Maurice Water
Is Town of Maurice Water tap water safe to drink?
EPA monitoring detected 20 contaminants in Town of Maurice Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Maurice Water's water?
EPA monitoring detected Lead, Copper, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Town of Maurice Water serve?
Town of Maurice Water reports serving 3,450 people in Louisiana, per its EPA record.
Has Town of Maurice Water had any water quality violations?
The EPA has 26 violations on file for Town of Maurice Water, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.