Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2011-12-20 |
| TT | Health-based | Resolved | 2011-12-20 |
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 1996-08-15 → 1996-09-14 |
| MCL | Health-based | Archived | 1996-08-15 → 1996-09-14 |
| MCL | Health-based | Archived | 1996-08-15 → 1996-09-14 |
| Other | Monitoring | Resolved | 2015-11-12 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 870 µg/L 67% of the EPA limit 1300 µg/L
worst single sample: 1200 µg/L | 27/42 | SYR4 | 2014–2017 |
| Lead | 3.9 µg/L 26% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 15/42 | SYR4 | 2014–2017 |
| Chloroform | 2.26 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 13/14 | SYR4 | 2013–2019 |
| TTHM | 6.54 µg/L 8.2% of the EPA limit 80 µg/L
worst single sample: 6.6 µg/L | 13/14 | SYR4 | 2013–2019 |
| Bromodichloromethane | 2.445 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 12/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 3.965 µg/L 6.6% of the EPA limit 60 µg/L
worst single sample: 4.9 µg/L | 12/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.2 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 11/14 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.35 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 11/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.8380 µg/L No EPA limit set
worst single sample: 0.8700 µg/L | 9/14 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2023 |
| Dichloroacetic Acid | 2.17 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 7/14 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 140 µg/L 1.4% of the EPA limit 10000 µg/L | 6/22 | SYR4 | 2012–2019 |
| Arsenic | 4 µg/L 40% of the EPA limit 10 µg/L | 4/4 | SYR4 | 2014–2017 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2014–2017 |
| Bromoform | 0.5720 µg/L No EPA limit set
worst single sample: 0.5800 µg/L | 2/14 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.391 pCi/L 28% of the EPA limit 5 pCi/L
worst single sample: 1.44 pCi/L | 2/2 | SYR4 | 2017 |
| Dalapon | 1.179 µg/L 0.6% of the EPA limit 200 µg/L | 2/4 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 2.066 pCi/L No EPA limit set
worst single sample: 2.08 pCi/L | 2/4 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 0.5725 µg/L No EPA limit set
worst single sample: 0.5800 µg/L | 2/14 | SYR4 | 2013–2019 |
| Combined Uranium | 1.49 µg/L 5% of the EPA limit 30 µg/L | 1/2 | SYR4 | 2014 |
| Lithium | 10.5 µg/L No EPA limit set | 1/2 | UCMR-5 | 2025 |
90 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Arnaudville Water
Is Town of Arnaudville Water tap water safe to drink?
EPA monitoring detected 21 contaminants in Town of Arnaudville Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Arnaudville Water's water?
EPA monitoring detected Copper, Lead, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Town of Arnaudville Water serve?
Town of Arnaudville Water reports serving 3,957 people in Louisiana, per its EPA record.
Has Town of Arnaudville Water had any water quality violations?
The EPA has 46 violations on file for Town of Arnaudville Water, of which 9 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.