Compliance record
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromoform | 34.21 µg/L No EPA limit set
worst single sample: 49.3 µg/L | 115/115 | SYR4 | 2012–2019 |
| Chloroform | 4.7 µg/L No EPA limit set
worst single sample: 7 µg/L | 115/115 | SYR4 | 2012–2019 |
| Dibromochloromethane | 27.26 µg/L No EPA limit set
worst single sample: 32.3 µg/L | 115/115 | SYR4 | 2012–2019 |
| TTHM | 71.05 µg/L 89% of the EPA limit 80 µg/L
worst single sample: 91.1 µg/L | 115/115 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 17.6 µg/L 29% of the EPA limit 60 µg/L
worst single sample: 20.4 µg/L | 115/115 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 9.84 µg/L No EPA limit set
worst single sample: 12 µg/L | 114/115 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.39 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 112/115 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10.555 µg/L No EPA limit set
worst single sample: 11.8 µg/L | 110/115 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.17 µg/L No EPA limit set
worst single sample: 7.6 µg/L | 87/115 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 4.81 µg/L No EPA limit set
worst single sample: 10 µg/L | 43/115 | SYR4 | 2012–2019 |
| Lead | 3 µg/L 20% of the EPA limit 15 µg/L | 30/68 | SYR4 | 2014–2019 |
| Fluoride | 256 µg/L 6.4% of the EPA limit 4000 µg/L
worst single sample: 300 µg/L | 12/12 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2023 |
| Nitrate-Nitrite | 200 µg/L 2% of the EPA limit 10000 µg/L | 10/40 | SYR4 | 2012–2019 |
| Copper | 100 µg/L 7.7% of the EPA limit 1300 µg/L | 8/68 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 1.9542 pCi/L 39% of the EPA limit 5 pCi/L
worst single sample: 2.1 pCi/L | 7/8 | SYR4 | 2016–2019 |
| Monochloroacetic Acid | 1.17 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 7/115 | SYR4 | 2012–2019 |
| Arsenic | 1.16 µg/L 12% of the EPA limit 10 µg/L
worst single sample: 1.2 µg/L | 5/12 | SYR4 | 2013–2019 |
| Di(2-ethylhexyl) Phthalate | 1.1 µg/L 18% of the EPA limit 6 µg/L
worst single sample: 1.2 µg/L | 5/10 | SYR4 | 2013–2019 |
| Barium | 340 µg/L 17% of the EPA limit 2000 µg/L | 4/12 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 3.5095 pCi/L No EPA limit set
worst single sample: 3.61 pCi/L | 4/12 | SYR4 | 2013–2019 |
| Lithium | 18.5 µg/L No EPA limit set | 4/4 | UCMR-5 | 2025 |
| Beryllium, Total | 1 µg/L 25% of the EPA limit 4 µg/L | 1/12 | SYR4 | 2013–2019 |
| Chromium | 5.2 µg/L 5.2% of the EPA limit 100 µg/L | 1/12 | SYR4 | 2013–2019 |
| Trichloroethylene | 0.5200 µg/L 10% of the EPA limit 5 µg/L | 1/12 | SYR4 | 2013–2019 |
85 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Lawco - Eunice Water
Is Lawco - Eunice Water tap water safe to drink?
EPA monitoring detected 25 contaminants in Lawco - Eunice Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lawco - Eunice Water's water?
EPA monitoring detected Bromoform, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Lawco - Eunice Water serve?
Lawco - Eunice Water reports serving 15,393 people in Louisiana, per its EPA record.
Has Lawco - Eunice Water had any water quality violations?
The EPA has no formal drinking-water violations on file for Lawco - Eunice Water.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.