Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2011-12-29 |
| MCL | Health-based | Archived | 2007-11-01 → 2007-11-30 |
| MCL | Health-based | Archived | 2007-11-01 → 2007-11-30 |
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 2003-09-01 → 2003-09-30 |
| MCL | Health-based | Archived | 1997-07-15 → 1997-08-14 |
| MCL | Health-based | Archived | 1997-07-15 → 1997-08-14 |
| MCL | Health-based | Archived | 1997-07-15 → 1997-08-14 |
| MCL | Health-based | Archived | 1996-08-15 → 1996-09-14 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 13.65 µg/L 91% of the EPA limit 15 µg/L
worst single sample: 19 µg/L | 24/36 | SYR4 | 2012–2019 |
| Copper | 600 µg/L 46% of the EPA limit 1300 µg/L | 16/36 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2024 |
| Barium | 97.25 µg/L 4.9% of the EPA limit 2000 µg/L
worst single sample: 98 µg/L | 6/8 | SYR4 | 2014–2019 |
| Fluoride | 414.5 µg/L 10% of the EPA limit 4000 µg/L
worst single sample: 486 µg/L | 6/8 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 2.075 µg/L 3.5% of the EPA limit 60 µg/L
worst single sample: 2.3 µg/L | 6/17 | SYR4 | 2013–2019 |
| Chloroform | 1.388 µg/L No EPA limit set
worst single sample: 1.41 µg/L | 5/17 | SYR4 | 2013–2019 |
| TTHM | 2.722 µg/L 3.4% of the EPA limit 80 µg/L
worst single sample: 3 µg/L | 5/17 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 0.6510 µg/L No EPA limit set
worst single sample: 0.6600 µg/L | 4/17 | SYR4 | 2013–2019 |
| Bromodichloromethane | 0.8910 µg/L No EPA limit set
worst single sample: 0.9200 µg/L | 3/17 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.6 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 3/17 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.7190 µg/L No EPA limit set
worst single sample: 0.7400 µg/L | 3/17 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.00295 pCi/L 20% of the EPA limit 5 pCi/L
worst single sample: 1.03 pCi/L | 2/6 | SYR4 | 2014–2019 |
| Gross Beta Particle Activity | 1.8325 pCi/L No EPA limit set
worst single sample: 1.86 pCi/L | 2/8 | SYR4 | 2014–2019 |
| Nitrate-Nitrite | 46.65 µg/L 0.5% of the EPA limit 10000 µg/L
worst single sample: 47 µg/L | 2/14 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 0.5455 µg/L No EPA limit set
worst single sample: 0.5600 µg/L | 2/17 | SYR4 | 2013–2019 |
| Arsenic | 0.5600 µg/L 5.6% of the EPA limit 10 µg/L | 1/8 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Adipate | 0.3470 µg/L 0.1% of the EPA limit 400 µg/L | 1/8 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Phthalate | 0.4290 µg/L 7.2% of the EPA limit 6 µg/L | 1/8 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 0.3900 µg/L No EPA limit set | 1/17 | SYR4 | 2013–2019 |
| Toluene | 0.0016 µg/L 0% of the EPA limit 1000 µg/L | 1/8 | SYR4 | 2014–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Martin Water
Is Martin Water tap water safe to drink?
EPA monitoring detected 21 contaminants in Martin Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Martin Water's water?
EPA monitoring detected Lead, Copper, Lead, Barium, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Martin Water serve?
Martin Water reports serving 1,350 people in Louisiana, per its EPA record.
Has Martin Water had any water quality violations?
The EPA has 110 violations on file for Martin Water, of which 14 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.