Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| TT | Health-based | Unaddressed | 2024-02-29 |
| TT | Health-based | Unaddressed | 2024-02-29 |
| TT | Health-based | Unaddressed | 2024-02-29 |
| TT | Health-based | Resolved | 2024-02-29 |
| TT | Health-based | Resolved | 2024-02-29 |
| TT | Health-based | Resolved | 2024-02-29 |
| TT | Health-based | Resolved | 2024-02-29 |
| TT | Health-based | Resolved | 2024-02-29 |
| TT | Health-based | Resolved | 2024-02-29 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Arsenic | 13 µg/L 130% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 15 µg/L | 55/55 | SYR4 | 2013–2019 |
| Chloroform | 60.64 µg/L No EPA limit set
worst single sample: 65.5 µg/L | 34/34 | SYR4 | 2013–2019 |
| TTHM | 92.575 µg/L 116% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 106 µg/L | 34/34 | SYR4 | 2013–2019 |
| Bromodichloromethane | 22.35 µg/L No EPA limit set
worst single sample: 26 µg/L | 32/34 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 19.46 µg/L No EPA limit set
worst single sample: 21.4 µg/L | 32/34 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 48.805 µg/L 81% of the EPA limit 60 µg/L
worst single sample: 56.8 µg/L | 32/34 | SYR4 | 2013–2019 |
| Barium | 1000 µg/L 50% of the EPA limit 2000 µg/L | 30/34 | SYR4 | 2013–2019 |
| Dibromochloromethane | 10.48 µg/L No EPA limit set
worst single sample: 14.2 µg/L | 28/34 | SYR4 | 2013–2019 |
| Lead | 4 µg/L 27% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 28/54 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 19.98 µg/L No EPA limit set
worst single sample: 21.2 µg/L | 25/34 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.115 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 20/34 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 1000 µg/L 10% of the EPA limit 10000 µg/L | 16/42 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2026 |
| Monochloroacetic Acid | 14.94 µg/L No EPA limit set
worst single sample: 17.1 µg/L | 13/34 | SYR4 | 2013–2019 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 12/12 | SYR4 | 2013–2018 |
| Bromoform | 2.85 µg/L No EPA limit set
worst single sample: 3 µg/L | 11/34 | SYR4 | 2013–2019 |
| Copper | 100 µg/L 7.7% of the EPA limit 1300 µg/L | 7/54 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Phthalate | 1.558 µg/L 26% of the EPA limit 6 µg/L
worst single sample: 1.9 µg/L | 7/12 | SYR4 | 2013–2018 |
| Gross Beta Particle Activity | 3.922 pCi/L No EPA limit set
worst single sample: 4 pCi/L | 7/12 | SYR4 | 2013–2018 |
| Chromium | 4.35 µg/L 4.4% of the EPA limit 100 µg/L
worst single sample: 4.5 µg/L | 4/18 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 2.2935 pCi/L 46% of the EPA limit 5 pCi/L
worst single sample: 2.37 pCi/L | 4/8 | SYR4 | 2016–2018 |
| Monobromoacetic Acid | 0.3375 µg/L No EPA limit set
worst single sample: 0.3400 µg/L | 2/34 | SYR4 | 2013–2019 |
| Lithium | 17.5 µg/L No EPA limit set | 2/2 | UCMR-5 | 2024 |
| Cadmium | 0.6400 µg/L 13% of the EPA limit 5 µg/L | 1/18 | SYR4 | 2013–2019 |
| Endrin | 0.0160 µg/L 0.8% of the EPA limit 2 µg/L | 1/12 | SYR4 | 2013–2018 |
87 contaminants tested, none detected
Utility contact
Frequently asked questions about Tallulah Water
Is Tallulah Water tap water safe to drink?
EPA monitoring detected 25 contaminants in Tallulah Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Tallulah Water's water?
EPA monitoring detected Arsenic, Chloroform, TTHM, Bromodichloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Tallulah Water serve?
Tallulah Water reports serving 8,601 people in Louisiana, per its EPA record.
Has Tallulah Water had any water quality violations?
The EPA has 247 violations on file for Tallulah Water, of which 162 are health-based (a contaminant limit or required treatment was breached) and 36 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.