Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2015-07-01 → 2015-07-31 |
| MCL | Health-based | Archived | 2015-07-01 → 2015-07-31 |
| MCL | Health-based | Archived | 2015-07-01 → 2015-07-31 |
| Other | Monitoring | Resolved | 1999-10-19 → 2000-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 16.135 µg/L No EPA limit set
worst single sample: 16.2 µg/L | 14/14 | SYR4 | 2013–2019 |
| Bromoform | 10.935 µg/L No EPA limit set
worst single sample: 11 µg/L | 14/14 | SYR4 | 2013–2019 |
| Chloroform | 8.698 µg/L No EPA limit set
worst single sample: 8.88 µg/L | 14/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 23.215 µg/L No EPA limit set
worst single sample: 23.8 µg/L | 14/14 | SYR4 | 2013–2019 |
| TTHM | 54.405 µg/L 68% of the EPA limit 80 µg/L
worst single sample: 55.9 µg/L | 14/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 10.275 µg/L No EPA limit set
worst single sample: 10.5 µg/L | 10/14 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 1000 µg/L 10% of the EPA limit 10000 µg/L | 10/30 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 14.475 µg/L 24% of the EPA limit 60 µg/L
worst single sample: 14.7 µg/L | 10/14 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2024 |
| Lead | 2 µg/L 13% of the EPA limit 15 µg/L | 7/34 | SYR4 | 2012–2019 |
| Copper | 100 µg/L 7.7% of the EPA limit 1300 µg/L | 6/34 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.975 µg/L No EPA limit set
worst single sample: 5 µg/L | 6/14 | SYR4 | 2013–2019 |
| Fluoride | 500 µg/L 13% of the EPA limit 4000 µg/L
worst single sample: 600 µg/L | 6/6 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.4 µg/L No EPA limit set | 6/14 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 0.7761 pCi/L 16% of the EPA limit 5 pCi/L
worst single sample: 0.8090 pCi/L | 2/4 | SYR4 | 2016–2019 |
| Di(2-ethylhexyl) Phthalate | 0.6620 µg/L 11% of the EPA limit 6 µg/L
worst single sample: 0.6700 µg/L | 2/6 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 0.8770 µg/L No EPA limit set
worst single sample: 0.8800 µg/L | 2/14 | SYR4 | 2013–2019 |
| Dalapon | 1.81 µg/L 0.9% of the EPA limit 200 µg/L | 1/6 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 2.04 pCi/L No EPA limit set | 1/6 | SYR4 | 2013–2019 |
| Selenium | 0.8400 µg/L 1.7% of the EPA limit 50 µg/L | 1/6 | SYR4 | 2013–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Mineral Springs Water
Is Mineral Springs Water tap water safe to drink?
EPA monitoring detected 20 contaminants in Mineral Springs Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mineral Springs Water's water?
EPA monitoring detected Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Mineral Springs Water serve?
Mineral Springs Water reports serving 900 people in Louisiana, per its EPA record.
Has Mineral Springs Water had any water quality violations?
The EPA has 4 violations on file for Mineral Springs Water, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.