Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
74
health-based violations
103
violations on file
15
still open
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Unaddressed | 2023-05-18 |
| TT | Health-based | Resolved | 2023-05-18 |
PFAS detected
PFAS are industrial “forever chemicals”. These are the EPA's latest
nationwide test results (2023–2025).
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| PFBS | 0.0039 µg/L | 1/16 | 2025 |
Other contaminants detected
Each bar shows the measured level as a share of the EPA limit: green is
well under, amber is close to it, red is over. For lead and copper the
limit applies to exactly the 90th-percentile figure shown, so red there
means a real exceedance. For everything else the limit applies to a
running annual average while the figure is the 95th percentile of this
system's samples — over 100% is worth reading, but is not by itself a
violation. Where a single sample came in higher than that percentile, it
is noted under the bar. Formal violations are listed separately.
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 14 µg/L 18% of the EPA limit 80 µg/L
worst single sample: 50.5 µg/L | 101/116 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.445 µg/L No EPA limit set
worst single sample: 16 µg/L | 98/116 | SYR4 | 2012–2019 |
| Copper | 500 µg/L 38% of the EPA limit 1300 µg/L
worst single sample: 800 µg/L | 92/126 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 6.29 µg/L 10% of the EPA limit 60 µg/L
worst single sample: 25 µg/L | 83/116 | SYR4 | 2012–2019 |
| Bromoform | 6.005 µg/L No EPA limit set
worst single sample: 11 µg/L | 80/116 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 77/116 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.7 µg/L No EPA limit set
worst single sample: 18 µg/L | 72/116 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1890 µg/L 19% of the EPA limit 10000 µg/L
worst single sample: 3000 µg/L | 52/100 | SYR4 | 2012–2019 |
| Fluoride | 294 µg/L 7.4% of the EPA limit 4000 µg/L
worst single sample: 340 µg/L | 44/52 | SYR4 | 2012–2019 |
| Barium | 460 µg/L 23% of the EPA limit 2000 µg/L
worst single sample: 1000 µg/L | 37/54 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.02 µg/L No EPA limit set
worst single sample: 13 µg/L | 33/116 | SYR4 | 2012–2019 |
| Chloroform | 1.52 µg/L No EPA limit set
worst single sample: 14 µg/L | 30/116 | SYR4 | 2012–2019 |
| Arsenic | 4.3 µg/L 43% of the EPA limit 10 µg/L
worst single sample: 5 µg/L | 21/54 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 1.583 µg/L 26% of the EPA limit 6 µg/L
worst single sample: 1.7 µg/L | 19/53 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 12.5 µg/L No EPA limit set
worst single sample: 20 µg/L | 16/116 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.451 pCi/L 29% of the EPA limit 5 pCi/L
worst single sample: 1.99 pCi/L | 15/36 | SYR4 | 2016–2019 |
| Lithium | 41.2 µg/L No EPA limit set | 15/16 | UCMR-5 | 2024 |
| Lead | 7.295 µg/L 49% of the EPA limit 15 µg/L
worst single sample: 8.4 µg/L | 14/126 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 5.84 µg/L No EPA limit set
worst single sample: 11 µg/L | 13/116 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Nitrate | 1800 µg/L 18% of the EPA limit 10000 µg/L | 12/14 | SYR4 | 2018–2019 |
| Gross Beta Particle Activity | 4.965 pCi/L No EPA limit set
worst single sample: 7 pCi/L | 11/54 | SYR4 | 2012–2019 |
| Chromium | 0.9940 µg/L 1% of the EPA limit 100 µg/L
worst single sample: 1 µg/L | 3/54 | SYR4 | 2012–2019 |
| Dalapon | 7.41 µg/L 3.7% of the EPA limit 200 µg/L | 3/50 | SYR4 | 2012–2019 |
| Selenium | 0.8300 µg/L 1.7% of the EPA limit 50 µg/L
worst single sample: 0.8400 µg/L | 3/54 | SYR4 | 2012–2019 |
| Hexachlorobenzene | 0.0697 µg/L 7% of the EPA limit 1 µg/L
worst single sample: 0.0700 µg/L | 2/54 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 0.5590 µg/L No EPA limit set
worst single sample: 0.5700 µg/L | 2/116 | SYR4 | 2012–2019 |
| Combined Uranium | 1.49 µg/L 5% of the EPA limit 30 µg/L | 1/36 | SYR4 | 2012–2016 |
| Gross Alpha, Excl. Radon And U | 3 pCi/L 20% of the EPA limit 15 pCi/L | 1/36 | SYR4 | 2012–2016 |
| Heptachlor Epoxide | 0.0074 µg/L 3.7% of the EPA limit 0.2000 µg/L | 1/54 | SYR4 | 2012–2019 |
82 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDi(2-ethylhexyl) AdipateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHfpo-DaHeptachlorHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene
Utility contact
Frequently asked questions about Village Water
Is Village Water tap water safe to drink?
EPA monitoring detected 31 contaminants in Village Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Village Water's water?
EPA monitoring detected TTHM, Dibromochloromethane, Copper, Total Haloacetic Acids (HAA5), Bromoform, and others. The full list with the level and data source for each is above.
How many people does Village Water serve?
Village Water reports serving 10,890 people in Louisiana, per its EPA record.
Has Village Water had any water quality violations?
The EPA has 103 violations on file for Village Water, of which 74 are health-based (a contaminant limit or required treatment was breached) and 15 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.