Tap WaterIndex

← Indiana

Tap water quality report

Brookville Water Works

EPA monitoring tested this supplier for 73 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

73
contaminants tested
11
detected
2,800
people served
0
health-based violations
Indiana rankingsLead in IndianaPFAS in Indiana
Water source
Ground water
Ownership
Local government
Counties served
Franklin

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
27
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MR Monitoring Resolved 2025-01-01 → 2025-12-31
MON Monitoring Resolved 2024-11-01 → 2024-11-30
MON Monitoring Resolved 2024-11-01 → 2024-11-30
MON Monitoring Resolved 2024-11-01 → 2024-11-30
MON Monitoring Resolved 2024-11-01 → 2024-11-30
MON Monitoring Resolved 2024-10-01 → 2024-10-31
MON Monitoring Resolved 2024-10-01 → 2024-10-31
MON Monitoring Resolved 2024-10-01 → 2024-10-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
3700 µg/L 37%
of the EPA limit 10000 µg/L
 18/18 SYR4 2012–2019
Copper
181 µg/L 14%
of the EPA limit 1300 µg/L
worst single sample: 190 µg/L
10/10 SYR4 2018
Lead
6.015 µg/L 40%
of the EPA limit 15 µg/L
worst single sample: 7.8 µg/L
8/10 SYR4 2018
Lead
0.0019 mg/L 13%
of the EPA limit 0.0150 mg/L
 7/7 LCR 2024
TTHM
14.6 µg/L 18%
of the EPA limit 80 µg/L
worst single sample: 14.8 µg/L
5/8 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
8.545 µg/L 14%
of the EPA limit 60 µg/L
worst single sample: 9.1 µg/L
4/8 SYR4 2012–2019
Barium
139 µg/L 7%
of the EPA limit 2000 µg/L
worst single sample: 140 µg/L
2/2 SYR4 2014–2017
Fluoride
1080 µg/L 27%
of the EPA limit 4000 µg/L
worst single sample: 1100 µg/L
2/2 SYR4 2014–2017
Gross Alpha, Excl. Radon And U
4.2 pCi/L 28%
of the EPA limit 15 pCi/L
 1/1 SYR4 2017
Gross Beta Particle Activity
3.5 pCi/L
No EPA limit set
 1/1 SYR4 2017
Xylenes, Total
0.5200 µg/L 0%
of the EPA limit 10000 µg/L
 1/6 SYR4 2014–2019
62 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChloroformChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromochloromethaneDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
RIPPERGER, TIM
Phone
765-647-2906
Email
[email protected]

Frequently asked questions about Brookville Water Works

Is Brookville Water Works tap water safe to drink?

EPA monitoring detected 11 contaminants in Brookville Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Brookville Water Works's water?

EPA monitoring detected Nitrate, Copper, Lead, Lead, TTHM, and others. The full list with the level and data source for each is above.

How many people does Brookville Water Works serve?

Brookville Water Works reports serving 2,800 people in Indiana, per its EPA record.

Has Brookville Water Works had any water quality violations?

The EPA has 27 violations on file for Brookville Water Works, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.