Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 760 µg/L 7.6% of the EPA limit 10000 µg/L | 32/44 | SYR4 | 2012–2019 |
| Copper | 166 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 250 µg/L | 21/138 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 760 µg/L 7.6% of the EPA limit 10000 µg/L | 16/22 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2022 |
| Dibromochloromethane | 5.44 µg/L No EPA limit set
worst single sample: 6.2 µg/L | 9/13 | SYR4 | 2013–2019 |
| TTHM | 29.4 µg/L 37% of the EPA limit 80 µg/L
worst single sample: 35 µg/L | 9/13 | SYR4 | 2013–2019 |
| Bromoform | 13 µg/L No EPA limit set | 8/13 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.53 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 13.26 µg/L 22% of the EPA limit 60 µg/L
worst single sample: 19 µg/L | 8/8 | SYR4 | 2013–2019 |
| Atrazine | 0.2500 µg/L 8.3% of the EPA limit 3 µg/L | 5/28 | SYR4 | 2012–2018 |
| Chromium | 5.267 µg/L 5.3% of the EPA limit 100 µg/L
worst single sample: 5.27 µg/L | 4/10 | SYR4 | 2013–2018 |
| Bromodichloromethane | 9.14 µg/L No EPA limit set
worst single sample: 10 µg/L | 3/13 | SYR4 | 2013–2019 |
| Fluoride | 68.1 µg/L 1.7% of the EPA limit 4000 µg/L
worst single sample: 69 µg/L | 3/22 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 6.26 pCi/L No EPA limit set
worst single sample: 6.5 pCi/L | 3/7 | SYR4 | 2013–2017 |
| Barium | 4.845 µg/L 0.2% of the EPA limit 2000 µg/L
worst single sample: 4.9 µg/L | 2/10 | SYR4 | 2013–2018 |
| Lead | 30.023 µg/L 200% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 31.34 µg/L | 2/138 | SYR4 | 2013–2019 |
| Chloroform | 21 µg/L No EPA limit set | 1/13 | SYR4 | 2013–2019 |
| Di(2-ethylhexyl) Phthalate | 2.8 µg/L 47% of the EPA limit 6 µg/L | 1/16 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 12 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| Ethylbenzene | 1.1 µg/L 0.2% of the EPA limit 700 µg/L | 1/15 | SYR4 | 2013–2018 |
| Trichloroacetic Acid | 5 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| Xylenes, Total | 7.5 µg/L 0.1% of the EPA limit 10000 µg/L | 1/15 | SYR4 | 2013–2018 |
92 contaminants tested, none detected
Utility contact
Frequently asked questions about Haina
Is Haina tap water safe to drink?
EPA monitoring detected 22 contaminants in Haina's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Haina's water?
EPA monitoring detected Nitrate, Copper, Nitrate-Nitrite, Lead, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Haina serve?
Haina reports serving 4,563 people in Hawaii, per its EPA record.
Has Haina had any water quality violations?
The EPA has no formal drinking-water violations on file for Haina.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.