Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2024-10-17 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| RPT | Monitoring | Unaddressed | 2024-10-17 |
| Other | Monitoring | Addressed | 2024-07-01 |
| MON | Monitoring | Archived | 2022-09-01 → 2022-09-30 |
| MR | Monitoring | Resolved | 2021-10-01 |
| MR | Monitoring | Resolved | 2021-10-01 |
| MR | Monitoring | Resolved | 2019-10-01 |
| MR | Monitoring | Resolved | 2019-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 1739 µg/L 17% of the EPA limit 10000 µg/L
worst single sample: 6102 µg/L | 120/234 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Fluoride | 310 µg/L 7.8% of the EPA limit 4000 µg/L
worst single sample: 340 µg/L | 11/11 | SYR4 | 2015–2019 |
| Barium | 161.95 µg/L 8.1% of the EPA limit 2000 µg/L
worst single sample: 163 µg/L | 8/10 | SYR4 | 2015–2019 |
| Dibromochloromethane | 5.6 µg/L No EPA limit set
worst single sample: 6.5 µg/L | 6/7 | SYR4 | 2014–2019 |
| TTHM | 6.7 µg/L 8.4% of the EPA limit 80 µg/L
worst single sample: 7.4 µg/L | 5/6 | SYR4 | 2014–2019 |
| Bromoform | 2.22 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 4/7 | SYR4 | 2014–2019 |
| Bromodichloromethane | 2.09 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 3/6 | SYR4 | 2014–2019 |
| Chloroform | 1.58 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 2/7 | SYR4 | 2014–2019 |
| Arsenic | 1 µg/L 10% of the EPA limit 10 µg/L | 1/10 | SYR4 | 2015–2019 |
| Copper | 2.2 µg/L 0.2% of the EPA limit 1300 µg/L | 1/4 | SYR4 | 2015–2018 |
| Combined Uranium | 0.1505 µg/L 0.5% of the EPA limit 30 µg/L | 1/3 | SYR4 | 2015–2018 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/5 | SYR4 | 2014–2019 |
| Gross Beta Particle Activity | 3.6 pCi/L No EPA limit set | 1/1 | SYR4 | 2015 |
| Total Haloacetic Acids (HAA5) | 1.1 µg/L 1.8% of the EPA limit 60 µg/L | 1/5 | SYR4 | 2014–2019 |
66 contaminants tested, none detected
Utility contact
Frequently asked questions about Julian Community Services District
Is Julian Community Services District tap water safe to drink?
EPA monitoring detected 15 contaminants in Julian Community Services District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Julian Community Services District's water?
EPA monitoring detected Nitrate, Lead, Fluoride, Barium, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Julian Community Services District serve?
Julian Community Services District reports serving 1,517 people in California, per its EPA record.
Has Julian Community Services District had any water quality violations?
The EPA has 173 violations on file for Julian Community Services District, of which 3 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.