Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2017-07-01 → 2017-07-31 |
| TT | Health-based | Resolved | 2017-07-01 → 2017-07-31 |
| TT | Health-based | Resolved | 2017-07-01 → 2017-07-31 |
| TT | Health-based | Resolved | 2017-07-01 → 2017-07-31 |
| TT | Health-based | Resolved | 2016-08-01 → 2016-08-31 |
| TT | Health-based | Resolved | 2016-08-01 → 2016-08-31 |
| TT | Health-based | Resolved | 2016-08-01 → 2016-08-31 |
| TT | Health-based | Resolved | 2016-08-01 → 2016-08-31 |
| TT | Health-based | Resolved | 2016-08-01 → 2016-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 910 µg/L 23% of the EPA limit 4000 µg/L
worst single sample: 1300 µg/L | 105/105 | SYR4 | 2012–2019 |
| Dibromochloromethane | 23.445 µg/L No EPA limit set
worst single sample: 28.9 µg/L | 70/70 | SYR4 | 2012–2019 |
| Bromodichloromethane | 22.8 µg/L No EPA limit set
worst single sample: 24.5 µg/L | 65/65 | SYR4 | 2012–2019 |
| Bromoform | 7.82 µg/L No EPA limit set
worst single sample: 12.3 µg/L | 65/65 | SYR4 | 2012–2019 |
| Chloroform | 28.8 µg/L No EPA limit set
worst single sample: 36.3 µg/L | 65/65 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 18.96 µg/L 32% of the EPA limit 60 µg/L
worst single sample: 19.5 µg/L | 55/55 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 8.245 µg/L No EPA limit set
worst single sample: 9.5 µg/L | 54/55 | SYR4 | 2012–2019 |
| TTHM | 68.76 µg/L 86% of the EPA limit 80 µg/L
worst single sample: 71.3 µg/L | 53/53 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 4.2 µg/L No EPA limit set
worst single sample: 5.4 µg/L | 51/55 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.21 µg/L No EPA limit set
worst single sample: 7.9 µg/L | 50/55 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 2340 µg/L 23% of the EPA limit 10000 µg/L
worst single sample: 2770 µg/L | 41/41 | SYR4 | 2012–2019 |
| Copper | 1004 µg/L 77% of the EPA limit 1300 µg/L
worst single sample: 1710 µg/L | 33/40 | SYR4 | 2014–2017 |
| Nitrate | 2160 µg/L 22% of the EPA limit 10000 µg/L | 18/18 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2025 |
| Monobromoacetic Acid | 1.985 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 8/55 | SYR4 | 2012–2019 |
| Lead | 9.6 µg/L 64% of the EPA limit 15 µg/L
worst single sample: 12 µg/L | 7/49 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4.165 pCi/L No EPA limit set
worst single sample: 4.2 pCi/L | 2/13 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 2.8 µg/L No EPA limit set | 2/55 | SYR4 | 2012–2019 |
| Antimony, Total | 2.1 µg/L 35% of the EPA limit 6 µg/L | 1/9 | SYR4 | 2012–2019 |
| Toluene | 1.38 µg/L 0.1% of the EPA limit 1000 µg/L | 1/12 | SYR4 | 2012–2019 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Dardanelle Waterworks
Is Dardanelle Waterworks tap water safe to drink?
EPA monitoring detected 23 contaminants in Dardanelle Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Dardanelle Waterworks's water?
EPA monitoring detected Fluoride, Dibromochloromethane, Bromodichloromethane, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Dardanelle Waterworks serve?
Dardanelle Waterworks reports serving 4,517 people in Arkansas, per its EPA record.
Has Dardanelle Waterworks had any water quality violations?
The EPA has 34 violations on file for Dardanelle Waterworks, of which 17 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.