Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| TT | Health-based | Resolved | 2013-11-01 → 2013-11-30 |
| TT | Health-based | Resolved | 2013-11-01 → 2013-11-30 |
| TT | Health-based | Resolved | 2013-11-01 → 2013-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1211.5 µg/L 30% of the EPA limit 4000 µg/L
worst single sample: 1400 µg/L | 110/111 | SYR4 | 2012–2019 |
| Bromodichloromethane | 14.3 µg/L No EPA limit set
worst single sample: 15.9 µg/L | 77/77 | SYR4 | 2012–2019 |
| Chloroform | 80.2 µg/L No EPA limit set
worst single sample: 104 µg/L | 77/77 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.1 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 73/83 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 26.275 µg/L No EPA limit set
worst single sample: 37.5 µg/L | 56/57 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 48.625 µg/L 81% of the EPA limit 60 µg/L
worst single sample: 59.8 µg/L | 56/57 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 27.1 µg/L No EPA limit set
worst single sample: 30.6 µg/L | 56/57 | SYR4 | 2012–2019 |
| TTHM | 97.99 µg/L 122% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 116 µg/L | 55/55 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.4 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 12/57 | SYR4 | 2012–2019 |
| Copper | 760 µg/L 58% of the EPA limit 1300 µg/L
worst single sample: 1180 µg/L | 11/20 | SYR4 | 2014–2017 |
| Lead | 8.6 µg/L 57% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 9/29 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2002 |
| Xylenes, Total | 4.068 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 4.17 µg/L | 4/22 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.19 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 3/57 | SYR4 | 2012–2019 |
| Ethylbenzene | 0.9985 µg/L 0.1% of the EPA limit 700 µg/L
worst single sample: 1 µg/L | 2/22 | SYR4 | 2012–2019 |
| Benzo(A)Pyrene | 0.0900 µg/L 45% of the EPA limit 0.2000 µg/L | 1/19 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 8.92 µg/L 149% of the EPA limit, at the 95th percentile of samples — 6 µg/L | 1/19 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4 pCi/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 2.1 µg/L No EPA limit set | 1/57 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Arkansas Health Center
Is Arkansas Health Center tap water safe to drink?
EPA monitoring detected 19 contaminants in Arkansas Health Center's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Arkansas Health Center's water?
EPA monitoring detected Fluoride, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Arkansas Health Center serve?
Arkansas Health Center reports serving 700 people in Arkansas, per its EPA record.
Has Arkansas Health Center had any water quality violations?
The EPA has 28 violations on file for Arkansas Health Center, of which 21 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.