Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-07-31 |
| MCL | Health-based | Resolved | 2008-01-01 → 2008-01-31 |
| MCL | Health-based | Resolved | 2008-01-01 → 2008-01-31 |
| MCL | Health-based | Resolved | 2008-01-01 → 2008-01-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-10-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-10-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-10-31 |
| MCL | Health-based | Resolved | 2006-10-01 → 2006-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Dibromochloromethane | 5.4215 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 20/33 | SYR4 | 2012–2019 |
| Chloroform | 5.009 µg/L No EPA limit set
worst single sample: 7.2 µg/L | 15/23 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.633 µg/L No EPA limit set
worst single sample: 4.04 µg/L | 12/23 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 4.42 pCi/L No EPA limit set
worst single sample: 4.6 pCi/L | 10/19 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2002 |
| Bromoform | 2.0325 µg/L No EPA limit set
worst single sample: 2.17 µg/L | 6/23 | SYR4 | 2012–2019 |
| Copper | 687.5 µg/L 53% of the EPA limit 1300 µg/L
worst single sample: 750 µg/L | 6/10 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 3.42 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 3/3 | SYR4 | 2014–2017 |
| Fluoride | 249 µg/L 6.2% of the EPA limit 4000 µg/L
worst single sample: 250 µg/L | 3/6 | SYR4 | 2012–2018 |
| Lead | 17.35 µg/L 116% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 19 µg/L | 3/16 | SYR4 | 2012–2018 |
| TTHM | 9.55 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 10 µg/L | 3/3 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 6.82 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 7.2 µg/L | 3/3 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 3.41 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 3/3 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 120 µg/L 1.2% of the EPA limit 10000 µg/L | 2/34 | SYR4 | 2012–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Grady Waterworks
Is Grady Waterworks tap water safe to drink?
EPA monitoring detected 14 contaminants in Grady Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Grady Waterworks's water?
EPA monitoring detected Dibromochloromethane, Chloroform, Bromodichloromethane, Gross Beta Particle Activity, Lead, and others. The full list with the level and data source for each is above.
How many people does Grady Waterworks serve?
Grady Waterworks reports serving 313 people in Arkansas, per its EPA record.
Has Grady Waterworks had any water quality violations?
The EPA has 23 violations on file for Grady Waterworks, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.