Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2014-07-01 → 2014-07-31 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-07-31 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-07-31 |
| MCL | Health-based | Resolved | 2010-10-01 → 2010-10-31 |
| MCL | Health-based | Resolved | 2010-10-01 → 2010-10-31 |
| MCL | Health-based | Resolved | 2001-05-01 → 2001-05-31 |
| MCL | Health-based | Resolved | 2000-09-01 → 2000-09-30 |
| MCL | Health-based | Resolved | 2000-09-01 → 2000-09-30 |
| MCL | Health-based | Resolved | 2000-09-01 → 2000-09-30 |
| MCL | Health-based | Resolved | 2000-09-01 → 2000-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate-Nitrite | 420 µg/L 4.2% of the EPA limit 10000 µg/L | 8/18 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2002 |
| Dibromochloromethane | 4.2575 µg/L No EPA limit set
worst single sample: 5.19 µg/L | 6/17 | SYR4 | 2012–2019 |
| Lead | 3.8 µg/L 25% of the EPA limit 15 µg/L
worst single sample: 4 µg/L | 5/14 | SYR4 | 2013–2019 |
| Bromoform | 6.1855 µg/L No EPA limit set
worst single sample: 6.49 µg/L | 4/14 | SYR4 | 2012–2019 |
| Fluoride | 360 µg/L 9% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2013–2019 |
| Xylenes, Total | 17.7085 µg/L 0.2% of the EPA limit 10000 µg/L
worst single sample: 19.9 µg/L | 4/10 | SYR4 | 2012–2019 |
| Copper | 52.03 µg/L 4% of the EPA limit 1300 µg/L
worst single sample: 53.4 µg/L | 2/10 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 1.285 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 2/4 | SYR4 | 2013–2017 |
| Gross Beta Particle Activity | 3.455 pCi/L No EPA limit set
worst single sample: 3.5 pCi/L | 2/4 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 1.285 µg/L 2.1% of the EPA limit 60 µg/L
worst single sample: 1.3 µg/L | 2/4 | SYR4 | 2013–2017 |
| Bromodichloromethane | 1.78 µg/L No EPA limit set | 1/14 | SYR4 | 2012–2019 |
| Chloroform | 0.6800 µg/L No EPA limit set | 1/14 | SYR4 | 2012–2019 |
| Ethylbenzene | 1.25 µg/L 0.2% of the EPA limit 700 µg/L | 1/10 | SYR4 | 2012–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about St Francis Water
Is St Francis Water tap water safe to drink?
EPA monitoring detected 14 contaminants in St Francis Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in St Francis Water's water?
EPA monitoring detected Nitrate-Nitrite, Lead, Dibromochloromethane, Lead, Bromoform, and others. The full list with the level and data source for each is above.
How many people does St Francis Water serve?
St Francis Water reports serving 208 people in Arkansas, per its EPA record.
Has St Francis Water had any water quality violations?
The EPA has 31 violations on file for St Francis Water, of which 13 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.