← Alabama

Tap water quality report

Troy Utilities, City of

EPA monitoring tested this supplier for 106 contaminants and detected 21. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

106
contaminants tested
21
detected
23,523
people served
3
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Pike

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

3
health-based violations
124
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2007-09-01 → 2007-09-30
MCL Health-based Archived 1997-01-01 → 1997-01-31
MCL Health-based Archived 1997-01-01 → 1997-01-31
MR Monitoring Resolved 2020-05-23 → 2020-08-23
MR Monitoring Resolved 2020-05-23 → 2020-08-23
MR Monitoring Resolved 2020-05-23 → 2020-08-23
MR Monitoring Resolved 2020-05-23 → 2020-08-23
MR Monitoring Resolved 2020-05-23 → 2020-08-23
MR Monitoring Resolved 2020-05-23 → 2020-08-23
MR Monitoring Resolved 2020-05-23 → 2020-08-23

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
12.37 µg/L 15%
of the EPA limit 80 µg/L
worst single sample: 16.6 µg/L
114/120 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
3.874 µg/L 6.5%
of the EPA limit 60 µg/L
worst single sample: 8.28 µg/L
79/120 SYR4 2012–2019
Copper
150.5 µg/L 12%
of the EPA limit 1300 µg/L
worst single sample: 180 µg/L
40/51 SYR4 2012–2019
Nitrate
473.25 µg/L 4.7%
of the EPA limit 10000 µg/L
worst single sample: 561 µg/L
26/104 SYR4 2012–2019
Lead
0.0010 mg/L 6.7%
of the EPA limit 0.0150 mg/L
20/20 LCR 2025
Fluoride
1213 µg/L 30%
of the EPA limit 4000 µg/L
worst single sample: 1600 µg/L
19/21 SYR4 2012–2019
Chloroform
1.3 µg/L
No EPA limit set
14/34 SYR4 2012–2019
Barium
70.15 µg/L 3.5%
of the EPA limit 2000 µg/L
worst single sample: 140 µg/L
12/21 SYR4 2012–2019
Lead
3.2 µg/L 21%
of the EPA limit 15 µg/L
worst single sample: 3.8 µg/L
11/51 SYR4 2012–2019
Antimony, Total
0.5080 µg/L 8.5%
of the EPA limit 6 µg/L
worst single sample: 0.5200 µg/L
7/21 SYR4 2012–2019
Chromium
3.715 µg/L 3.7%
of the EPA limit 100 µg/L
worst single sample: 4.9 µg/L
7/21 SYR4 2012–2019
Bromodichloromethane
1.6 µg/L
No EPA limit set
4/34 SYR4 2012–2019
Nitrate-Nitrite
140 µg/L 1.4%
of the EPA limit 10000 µg/L
4/21 SYR4 2012–2019
Bromoform
5.3 µg/L
No EPA limit set
2/34 SYR4 2012–2019
Dibromochloromethane
3.2 µg/L
No EPA limit set
2/34 SYR4 2012–2019
Gross Alpha, Excl. Radon And U
2.545 pCi/L 17%
of the EPA limit 15 pCi/L
worst single sample: 2.6 pCi/L
2/17 SYR4 2012–2016
Selenium
0.3180 µg/L 0.6%
of the EPA limit 50 µg/L
worst single sample: 0.3200 µg/L
2/21 SYR4 2012–2019
Arsenic
0.2800 µg/L 2.8%
of the EPA limit 10 µg/L
1/21 SYR4 2012–2019
Combined Radium (-226 And -228)
0.2000 pCi/L 4%
of the EPA limit 5 pCi/L
1/1 SYR4 2012
Gross Beta Particle Activity
4.2 pCi/L
No EPA limit set
1/1 SYR4 2012
Trichloroethylene
0.6000 µg/L 12%
of the EPA limit 5 µg/L
1/34 SYR4 2012–2019
85 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
MOUNT, ETHAN
Phone
334-670-6031
Email
[email protected]

Frequently asked questions about Troy Utilities, City of

Is Troy Utilities, City of tap water safe to drink?

EPA monitoring detected 21 contaminants in Troy Utilities, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Troy Utilities, City of's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Nitrate, Lead, and others. The full list with the level and data source for each is above.

How many people does Troy Utilities, City of serve?

Troy Utilities, City of reports serving 23,523 people in Alabama, per its EPA record.

Has Troy Utilities, City of had any water quality violations?

The EPA has 124 violations on file for Troy Utilities, City of, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.