Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2008-01-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2008-01-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2008-01-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2008-01-01 → 2010-12-31 |
| Other | Monitoring | Resolved | 2021-10-01 |
| MR | Monitoring | Resolved | 2020-09-01 → 2021-08-31 |
| MR | Monitoring | Resolved | 2020-09-01 → 2021-08-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Arsenic | 28.9 µg/L 289% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 29 µg/L | 21/21 | SYR4 | 2012–2019 |
| Copper | 58.16 µg/L 4.5% of the EPA limit 1300 µg/L
worst single sample: 69.5 µg/L | 19/20 | SYR4 | 2013 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Combined Radium (-226 And -228) | 0.9100 pCi/L 18% of the EPA limit 5 pCi/L
worst single sample: 1.09 pCi/L | 11/12 | SYR4 | 2014–2016 |
| Dichloroacetic Acid | 11.46 µg/L No EPA limit set
worst single sample: 12 µg/L | 7/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 22.4 µg/L 37% of the EPA limit 60 µg/L
worst single sample: 23 µg/L | 7/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 10.43 µg/L No EPA limit set
worst single sample: 11 µg/L | 7/8 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.05 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 6/7 | SYR4 | 2013–2019 |
| Chloroform | 38.475 µg/L No EPA limit set
worst single sample: 40.3 µg/L | 6/7 | SYR4 | 2013–2019 |
| Gross Beta Particle Activity | 5.95 pCi/L No EPA limit set
worst single sample: 6.1 pCi/L | 6/6 | SYR4 | 2015 |
| TTHM | 43.175 µg/L 54% of the EPA limit 80 µg/L
worst single sample: 44.9 µg/L | 6/7 | SYR4 | 2013–2019 |
| Barium | 22.6 µg/L 1.1% of the EPA limit 2000 µg/L
worst single sample: 24 µg/L | 5/5 | SYR4 | 2014–2019 |
| Fluoride | 455.25 µg/L 11% of the EPA limit 4000 µg/L
worst single sample: 465 µg/L | 4/8 | SYR4 | 2014–2019 |
| Toluene | 65.789 µg/L 6.6% of the EPA limit 1000 µg/L
worst single sample: 73 µg/L | 3/41 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.5095 µg/L No EPA limit set
worst single sample: 0.5100 µg/L | 2/7 | SYR4 | 2013–2019 |
| Lead | 2.3015 µg/L 15% of the EPA limit 15 µg/L
worst single sample: 2.31 µg/L | 2/20 | SYR4 | 2013 |
| Benzene | 1.8 µg/L 36% of the EPA limit 5 µg/L | 1/41 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2.4 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
| Tetrachloroethylene | 1 µg/L 20% of the EPA limit 5 µg/L | 1/41 | SYR4 | 2013–2019 |
| Vinyl Chloride | 0.8000 µg/L 40% of the EPA limit 2 µg/L | 1/41 | SYR4 | 2013–2019 |
| Xylenes, Total | 1.2 µg/L 0% of the EPA limit 10000 µg/L | 1/41 | SYR4 | 2013–2019 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about Kenai Water
Is Kenai Water tap water safe to drink?
EPA monitoring detected 21 contaminants in Kenai Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kenai Water's water?
EPA monitoring detected Arsenic, Copper, Lead, Combined Radium (-226 And -228), Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Kenai Water serve?
Kenai Water reports serving 5,700 people in Alaska, per its EPA record.
Has Kenai Water had any water quality violations?
The EPA has 295 violations on file for Kenai Water, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.