← Vermont

Tap water quality report

Saint Albans City, VT

EPA monitoring detected 12 contaminants across the 1 water supplier serving Saint Albans City. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

1
water supplier
10,200
people served
12
contaminants found

What was found in Saint Albans City's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
800 µg/L 20%
of the EPA limit 4000 µg/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Nitrate
418 µg/L 4.2%
of the EPA limit 10000 µg/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Copper
285.5 µg/L 22%
of the EPA limit 1300 µg/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2018
1/1 SYR4
TTHM
58.51 µg/L 73%
of the EPA limit 80 µg/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Chloroform
52.12 µg/L
No EPA limit set
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Total Haloacetic Acids (HAA5)
45.94 µg/L 77%
of the EPA limit 60 µg/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Lead
39.75 µg/L 265%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2018
1/1 SYR4
Trichloroacetic Acid
28.41 µg/L
No EPA limit set
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Dichloroacetic Acid
18.32 µg/L
No EPA limit set
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Bromodichloromethane
5.03 µg/L
No EPA limit set
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Combined Radium (-226 And -228)
0.6410 pCi/L 13%
of the EPA limit 5 pCi/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2019
1/1 SYR4
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
Main supplier: ST ALBANS WATER DEPT · 10,200 people · 2024
1/1 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Saint Albans City

SupplierPopulation served
ST ALBANS WATER DEPT 10,200

Frequently asked questions about Saint Albans City tap water

Is Saint Albans City tap water safe to drink?

EPA testing detected 12 contaminants in the water serving Saint Albans City. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Saint Albans City?

1 public water supplier report drinking-water monitoring for Saint Albans City, Vermont to the EPA. Each is listed above with its population served.

What contaminants are in Saint Albans City's water?

The contaminants EPA monitoring detected in Saint Albans City include Fluoride, Nitrate, Copper, TTHM, Chloroform. The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.