Tap WaterIndex

← Utah

Tap water quality report

Kaysville, UT

EPA monitoring detected 13 contaminants across the 2 water suppliers serving Kaysville. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

2
water suppliers
33,671
people served
13
contaminants found
Utah rankings Lead in Utah PFAS in Utah

What was found in Kaysville's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Copper
1432.85 µg/L 110%
of the EPA limit, at the 95th percentile of samples — 1300 µg/L
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2017
Highest in the city: 1459.11 µg/L — MUTTON HOLLOW IMPROVEMENT DISTRICT · 695 people · 2019
2/2 SYR4
TTHM
52.975 µg/L 66%
of the EPA limit 80 µg/L
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
2/2 SYR4
Chloroform
36.42 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
2/2 SYR4
Total Haloacetic Acids (HAA5)
20 µg/L 33%
of the EPA limit 60 µg/L
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
Highest in the city: 22.59 µg/L — MUTTON HOLLOW IMPROVEMENT DISTRICT · 695 people · 2019
2/2 SYR4
Lead
3.62 µg/L 24%
of the EPA limit 15 µg/L
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2017
Highest in the city: 19.8655 µg/L — MUTTON HOLLOW IMPROVEMENT DISTRICT · 695 people · 2019
2/2 SYR4
Trichloroacetic Acid
13.76 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
2/2 SYR4
Dichloroacetic Acid
11.14 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
Highest in the city: 13.005 µg/L — MUTTON HOLLOW IMPROVEMENT DISTRICT · 695 people · 2019
2/2 SYR4
Lithium
13 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2025
1/2 UCMR-5
Bromodichloromethane
10.52 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
2/2 SYR4
Dibromochloromethane
4.265 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
Highest in the city: 4.415 µg/L — MUTTON HOLLOW IMPROVEMENT DISTRICT · 695 people · 2019
2/2 SYR4
Dibromoacetic Acid
1.66 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
2/2 SYR4
Bromoform
1.25 µg/L
No EPA limit set
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2019
2/2 SYR4
Lead
0.0041 mg/L 27%
of the EPA limit 0.0150 mg/L
Main supplier: KAYSVILLE CITY WATER SYSTEM · 32,976 people · 2023
Highest in the city: 0.0042 mg/L — MUTTON HOLLOW IMPROVEMENT DISTRICT · 695 people · 2024
2/2 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Kaysville

SupplierPopulation served
KAYSVILLE CITY WATER SYSTEM 32,976
MUTTON HOLLOW IMPROVEMENT DISTRICT 695

Frequently asked questions about Kaysville tap water

Is Kaysville tap water safe to drink?

EPA testing detected 13 contaminants in the water serving Kaysville. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Kaysville?

2 public water suppliers report drinking-water monitoring for Kaysville, Utah to the EPA. Each is listed above with its population served.

What contaminants are in Kaysville's water?

The contaminants EPA monitoring detected in Kaysville include Copper, TTHM, Chloroform, Total Haloacetic Acids (HAA5), Lead. The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.