← South Carolina

Tap water quality report

St. George, SC

EPA monitoring detected 14 contaminants across the 2 water suppliers serving St. George. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

2
water suppliers
2,450
people served
14
contaminants found

What was found in St. George's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
373 µg/L 9.3%
of the EPA limit 4000 µg/L
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2019
Highest in the city: 490 µg/L — DCWS CONOFLOW (SC1820007) · 150 people · 2018
2/2 SYR4
TTHM
6.6115 µg/L 8.3%
of the EPA limit 80 µg/L
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2019
Highest in the city: 71.1348 µg/L — DCWS CONOFLOW (SC1820007) · 150 people · 2019
2/2 SYR4
Chloroform
2.5 µg/L
No EPA limit set
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2019
Highest in the city: 52.8909 µg/L — DCWS CONOFLOW (SC1820007) · 150 people · 2019
2/2 SYR4
Copper
51.3 µg/L 3.9%
of the EPA limit 1300 µg/L
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2019
2/2 SYR4
Total Haloacetic Acids (HAA5)
36.8762 µg/L 61%
of the EPA limit 60 µg/L
Highest in the city: DCWS CONOFLOW (SC1820007) · 150 people · 2019
1/2 SYR4
Dibromochloromethane
2.0635 µg/L
No EPA limit set
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2019
Highest in the city: 36.45 µg/L — DCWS CONOFLOW (SC1820007) · 150 people · 2019
2/2 SYR4
Lead
35.475 µg/L 237%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2019
2/2 SYR4
Nitrate
26 µg/L 0.3%
of the EPA limit 10000 µg/L
Highest in the city: DCWS CONOFLOW (SC1820007) · 150 people · 2019
1/2 SYR4
Dichloroacetic Acid
22.7484 µg/L
No EPA limit set
Highest in the city: DCWS CONOFLOW (SC1820007) · 150 people · 2019
1/2 SYR4
Bromodichloromethane
2.173 µg/L
No EPA limit set
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2019
Highest in the city: 13.422 µg/L — DCWS CONOFLOW (SC1820007) · 150 people · 2019
2/2 SYR4
Trichloroacetic Acid
13.3576 µg/L
No EPA limit set
Highest in the city: DCWS CONOFLOW (SC1820007) · 150 people · 2019
1/2 SYR4
Monobromoacetic Acid
3.3425 µg/L
No EPA limit set
Highest in the city: DCWS CONOFLOW (SC1820007) · 150 people · 2019
1/2 SYR4
Dibromoacetic Acid
1.11 µg/L
No EPA limit set
Highest in the city: DCWS CONOFLOW (SC1820007) · 150 people · 2019
1/2 SYR4
Lead
0.0030 mg/L 20%
of the EPA limit 0.0150 mg/L
Main supplier: ST GEORGE TOWN OF (SC1810001) · 2,300 people · 2025
Highest in the city: 0.0048 mg/L — DCWS CONOFLOW (SC1820007) · 150 people · 2023
2/2 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving St. George

SupplierPopulation served
ST GEORGE TOWN OF (SC1810001) 2,300
DCWS CONOFLOW (SC1820007) 150

Frequently asked questions about St. George tap water

Is St. George tap water safe to drink?

EPA testing detected 14 contaminants in the water serving St. George. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve St. George?

2 public water suppliers report drinking-water monitoring for St. George, South Carolina to the EPA. Each is listed above with its population served.

What contaminants are in St. George's water?

The contaminants EPA monitoring detected in St. George include Fluoride, TTHM, Chloroform, Copper, Total Haloacetic Acids (HAA5). The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.