Tap WaterIndex

← Kentucky

Tap water quality report

Jamestown, KY

EPA monitoring detected 11 contaminants across the 1 water supplier serving Jamestown. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

1
water supplier
7,402
people served
11
contaminants found
Kentucky rankings Lead in Kentucky PFAS in Kentucky

What was found in Jamestown's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Fluoride
1200 µg/L 30%
of the EPA limit 4000 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2019
1/1 SYR4
Nitrate
610 µg/L 6.1%
of the EPA limit 10000 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2019
1/1 SYR4
Nitrate-Nitrite
577 µg/L 5.8%
of the EPA limit 10000 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2019
1/1 SYR4
Copper
143 µg/L 11%
of the EPA limit 1300 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2019
1/1 SYR4
TTHM
90.255 µg/L 113%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2019
1/1 SYR4
Total Haloacetic Acids (HAA5)
78 µg/L 130%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2019
1/1 SYR4
Barium
25.4 µg/L 1.3%
of the EPA limit 2000 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2019
1/1 SYR4
Lead
13.35 µg/L 89%
of the EPA limit 15 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2018
1/1 SYR4
Combined Radium (-226 And -228)
0.8200 pCi/L 16%
of the EPA limit 5 pCi/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2013
1/1 SYR4
Combined Uranium
0.0120 µg/L 0%
of the EPA limit 30 µg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2013
1/1 SYR4
Lead
0.0050 mg/L 33%
of the EPA limit 0.0150 mg/L
Main supplier: JAMESTOWN MUNICIPAL WATER WORKS · 7,402 people · 2024
1/1 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Jamestown

SupplierPopulation served
JAMESTOWN MUNICIPAL WATER WORKS 7,402

Frequently asked questions about Jamestown tap water

Is Jamestown tap water safe to drink?

EPA testing detected 11 contaminants in the water serving Jamestown. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Jamestown?

1 public water supplier report drinking-water monitoring for Jamestown, Kentucky to the EPA. Each is listed above with its population served.

What contaminants are in Jamestown's water?

The contaminants EPA monitoring detected in Jamestown include Fluoride, Nitrate, Nitrate-Nitrite, Copper, TTHM. The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.