Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2016-04-01 → 2016-06-30 |
| MCL | Health-based | Resolved | 2016-04-01 → 2016-06-30 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 152.5 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 215 µg/L | 31/31 | SYR4 | 2015–2019 |
| Lead | 14.25 µg/L 95% of the EPA limit 15 µg/L
worst single sample: 21 µg/L | 16/31 | SYR4 | 2015–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2025 |
| Bromodichloromethane | 4.26 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 3/3 | SYR4 | 2014–2017 |
| Bromoform | 1.81 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 3/3 | SYR4 | 2014–2017 |
| Chloroform | 3.67 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 3/3 | SYR4 | 2014–2017 |
| Dibromochloromethane | 4.27 µg/L No EPA limit set
worst single sample: 4.3 µg/L | 3/3 | SYR4 | 2014–2017 |
| TTHM | 13.6 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 14 µg/L | 3/3 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 1.093 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 2/2 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 1.485 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 2/2 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 3.525 µg/L 5.9% of the EPA limit 60 µg/L
worst single sample: 3.6 µg/L | 2/2 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 0.5800 µg/L No EPA limit set | 1/2 | SYR4 | 2014–2017 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Bennor Estates & Improvement District
Is Bennor Estates & Improvement District tap water safe to drink?
EPA monitoring detected 12 contaminants in Bennor Estates & Improvement District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bennor Estates & Improvement District's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Bennor Estates & Improvement District serve?
Bennor Estates & Improvement District reports serving 144 people in Wyoming, per its EPA record.
Has Bennor Estates & Improvement District had any water quality violations?
The EPA has 52 violations on file for Bennor Estates & Improvement District, of which 52 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.