Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Archived | 1999-06-01 → 1999-06-30 |
| TT | Health-based | Archived | 1998-05-01 → 1998-05-31 |
| TT | Health-based | Archived | 1997-05-01 → 1997-05-31 |
| MR | Monitoring | Archived | 2023-07-01 → 2023-07-31 |
| MR | Monitoring | Archived | 2023-07-01 → 2023-07-31 |
| MR | Monitoring | Archived | 2023-07-01 → 2023-07-31 |
| MR | Monitoring | Archived | 2023-05-01 → 2023-05-31 |
| MR | Monitoring | Archived | 2023-05-01 → 2023-05-31 |
| MR | Monitoring | Archived | 2023-05-01 → 2023-05-31 |
| MR | Monitoring | Archived | 2023-04-01 → 2023-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 31 µg/L 39% of the EPA limit 80 µg/L
worst single sample: 33 µg/L | 29/31 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 20.6 µg/L 34% of the EPA limit 60 µg/L
worst single sample: 38 µg/L | 25/31 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1300 µg/L 13% of the EPA limit 10000 µg/L | 12/16 | SYR4 | 2012–2019 |
| Copper | 113 µg/L 8.7% of the EPA limit 1300 µg/L
worst single sample: 140 µg/L | 10/10 | SYR4 | 2017 |
| Fluoride | 132.2 µg/L 3.3% of the EPA limit 4000 µg/L
worst single sample: 146 µg/L | 7/8 | SYR4 | 2012–2019 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2023 |
| Bhc-Gamma | 0.0048 µg/L 2.4% of the EPA limit 0.2000 µg/L | 1/3 | SYR4 | 2013–2018 |
| Cyanide | 32 µg/L 16% of the EPA limit 200 µg/L | 1/8 | SYR4 | 2012–2019 |
| Hexachlorobenzene | 0.0200 µg/L 2% of the EPA limit 1 µg/L | 1/3 | SYR4 | 2013–2018 |
| Heptachlor Epoxide | 0.0037 µg/L 1.9% of the EPA limit 0.2000 µg/L | 1/3 | SYR4 | 2013–2018 |
| Lead | 3 µg/L 20% of the EPA limit 15 µg/L | 1/10 | SYR4 | 2017 |
| Thallium, Total | 1.31 µg/L 66% of the EPA limit 2 µg/L | 1/8 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Dayton, Town of
Is Dayton, Town of tap water safe to drink?
EPA monitoring detected 12 contaminants in Dayton, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Dayton, Town of's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Nitrate-Nitrite, Copper, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Dayton, Town of serve?
Dayton, Town of reports serving 824 people in Wyoming, per its EPA record.
Has Dayton, Town of had any water quality violations?
The EPA has 72 violations on file for Dayton, Town of, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.