Is Wright Water & Sewer District Tap Water Safe? Quality Report

Water source: Ground water
Ownership: Local government
Counties served: Campbell

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

health-based violations

violations on file

still open

Violation	Type	Status	Period
MR	Monitoring	Resolved	2022-01-01 → 2022-03-31
MR	Monitoring	Resolved	2017-08-01 → 2018-07-31
MR	Monitoring	Resolved	2017-08-01 → 2018-07-31
MR	Monitoring	Archived	1992-05-01 → 1992-05-31
MR	Monitoring	Archived	1992-03-01 → 1992-03-31
MR	Monitoring	Archived	1976-07-01 → 1980-06-30
MR	Monitoring	Archived	1976-07-01 → 1980-06-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.

Contaminant	Level vs EPA limit	Detection rate	Source	Period
Copper	267.85 µg/L 21% of the EPA limit 1300 µg/L worst single sample: 284 µg/L	20/20	SYR4	2014–2017
Nitrate-Nitrite	40 µg/L 0.4% of the EPA limit 10000 µg/L	18/18	SYR4	2012–2019
Lead	5.7 µg/L 38% of the EPA limit 15 µg/L worst single sample: 7 µg/L	14/20	SYR4	2014–2017
Lead	0.0030 mg/L 20% of the EPA limit 0.0150 mg/L	10/10	LCR	2025
TTHM	9.015 µg/L 11% of the EPA limit 80 µg/L worst single sample: 9.6 µg/L	10/10	SYR4	2013–2019
Bromodichloromethane	3.18 µg/L No EPA limit set worst single sample: 3.5 µg/L	9/9	SYR4	2013–2019
Chloroform	2.8 µg/L No EPA limit set worst single sample: 3.4 µg/L	9/9	SYR4	2013–2019
Dibromochloromethane	3.18 µg/L No EPA limit set worst single sample: 3.5 µg/L	9/9	SYR4	2013–2019
Total Haloacetic Acids (HAA5)	3.32 µg/L 5.5% of the EPA limit 60 µg/L worst single sample: 4.3 µg/L	8/8	SYR4	2013–2019
Dibromoacetic Acid	0.9920 µg/L No EPA limit set worst single sample: 1.1 µg/L	7/7	SYR4	2013–2019
Bromoform	1.175 µg/L No EPA limit set worst single sample: 1.2 µg/L	6/9	SYR4	2013–2019
Barium	180 µg/L 9% of the EPA limit 2000 µg/L	4/4	SYR4	2013–2019
Dichloroacetic Acid	1.237 µg/L No EPA limit set worst single sample: 1.3 µg/L	4/7	SYR4	2013–2019
Fluoride	1185 µg/L 30% of the EPA limit 4000 µg/L worst single sample: 1200 µg/L	4/4	SYR4	2013–2019
Xylenes, Total	2.509 µg/L 0% of the EPA limit 10000 µg/L worst single sample: 2.7 µg/L	3/5	SYR4	2013–2019
Gross Alpha, Excl. Radon And U	3.41 pCi/L 23% of the EPA limit 15 pCi/L worst single sample: 3.5 pCi/L	2/2	SYR4	2013–2019
Combined Radium (-226 And -228)	2.2 pCi/L 44% of the EPA limit 5 pCi/L	1/2	SYR4	2013–2019
Ethylbenzene	0.6000 µg/L 0.1% of the EPA limit 700 µg/L	1/5	SYR4	2013–2019
Monochloroacetic Acid	1.5 µg/L No EPA limit set	1/7	SYR4	2013–2019

61 contaminants tested, none detected

1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact: STROHSCHEIN, LEVI
Phone: 307-660-6004
Email: [email protected]

Frequently asked questions about Wright Water & Sewer District

Is Wright Water & Sewer District tap water safe to drink?

EPA monitoring detected 19 contaminants in Wright Water & Sewer District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wright Water & Sewer District's water?

EPA monitoring detected Copper, Nitrate-Nitrite, Lead, Lead, TTHM, and others. The full list with the level and data source for each is above.

How many people does Wright Water & Sewer District serve?

Wright Water & Sewer District reports serving 3,207 people in Wyoming, per its EPA record.

Has Wright Water & Sewer District had any water quality violations?

The EPA has 7 violations on file for Wright Water & Sewer District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.