Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2007-08-01 → 2007-08-31 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| MR | Monitoring | Resolved | 2022-03-01 → 2022-05-31 |
| MR | Monitoring | Resolved | 2022-03-01 → 2022-05-31 |
| MR | Monitoring | Archived | 1999-07-01 → 1999-07-31 |
| MR | Monitoring | Archived | 1992-11-01 → 1992-11-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 86.23 µg/L 108% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 95 µg/L | 44/44 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 42.06 µg/L 70% of the EPA limit 60 µg/L
worst single sample: 46 µg/L | 38/38 | SYR4 | 2012–2019 |
| Bromodichloromethane | 22.65 µg/L No EPA limit set
worst single sample: 27 µg/L | 28/28 | SYR4 | 2014–2019 |
| Chloroform | 64.88 µg/L No EPA limit set
worst single sample: 70 µg/L | 28/28 | SYR4 | 2014–2019 |
| Dibromochloromethane | 6.425 µg/L No EPA limit set
worst single sample: 7 µg/L | 28/28 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 18.9 µg/L No EPA limit set
worst single sample: 26 µg/L | 23/23 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 18.95 µg/L No EPA limit set
worst single sample: 22 µg/L | 22/23 | SYR4 | 2014–2019 |
| Copper | 136.9 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 199 µg/L | 19/21 | SYR4 | 2015–2018 |
| Dibromoacetic Acid | 1.32 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 17/23 | SYR4 | 2014–2019 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L | 9/9 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2024 |
| Monochloroacetic Acid | 2.665 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 8/23 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 1.075 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 6/23 | SYR4 | 2014–2019 |
| Xylenes, Total | 4.3 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 4.4 µg/L | 3/13 | SYR4 | 2012–2019 |
| Ethylbenzene | 0.6175 µg/L 0.1% of the EPA limit 700 µg/L
worst single sample: 0.6200 µg/L | 2/13 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 39.5 µg/L 0.4% of the EPA limit 10000 µg/L
worst single sample: 40 µg/L | 2/9 | SYR4 | 2012–2019 |
| Selenium | 1.95 µg/L 3.9% of the EPA limit 50 µg/L
worst single sample: 2 µg/L | 2/9 | SYR4 | 2012–2019 |
| Arsenic | 7 µg/L 70% of the EPA limit 10 µg/L | 1/9 | SYR4 | 2012–2019 |
| Combined Uranium | 4 µg/L 13% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2019 |
| Gross Alpha, Excl. Radon And U | 4.4 pCi/L 29% of the EPA limit 15 pCi/L | 1/2 | SYR4 | 2013–2019 |
| Lead | 1 µg/L 6.7% of the EPA limit 15 µg/L | 1/21 | SYR4 | 2015–2018 |
| Thallium, Total | 1.5 µg/L 75% of the EPA limit 2 µg/L | 1/9 | SYR4 | 2012–2019 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Evansville, Town of
Is Evansville, Town of tap water safe to drink?
EPA monitoring detected 22 contaminants in Evansville, Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Evansville, Town of's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Evansville, Town of serve?
Evansville, Town of reports serving 2,873 people in Wyoming, per its EPA record.
Has Evansville, Town of had any water quality violations?
The EPA has 7 violations on file for Evansville, Town of, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.