Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2011-04-01 → 2011-06-30 |
| MCL | Health-based | Resolved | 2006-01-01 → 2006-03-31 |
| MCL | Health-based | Resolved | 2006-01-01 → 2006-03-31 |
| MCL | Health-based | Resolved | 2006-01-01 → 2006-03-31 |
| MCL | Health-based | Resolved | 2006-01-01 → 2006-03-31 |
| MCL | Health-based | Resolved | 2005-10-01 → 2005-12-31 |
| MCL | Health-based | Resolved | 2005-10-01 → 2005-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 467.7 µg/L 36% of the EPA limit 1300 µg/L
worst single sample: 735 µg/L | 139/140 | SYR4 | 2013–2019 |
| Lead | 3.15 µg/L 21% of the EPA limit 15 µg/L
worst single sample: 52.4 µg/L | 136/140 | SYR4 | 2013–2019 |
| Bromodichloromethane | 18.64 µg/L No EPA limit set
worst single sample: 20.3 µg/L | 53/53 | SYR4 | 2012–2019 |
| Chloroform | 78.8 µg/L No EPA limit set
worst single sample: 87.6 µg/L | 53/53 | SYR4 | 2012–2019 |
| TTHM | 96.52 µg/L 121% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 111 µg/L | 53/53 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 75.52 µg/L 126% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 86.8 µg/L | 53/53 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 39.88 µg/L No EPA limit set
worst single sample: 41.6 µg/L | 53/53 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.9 µg/L No EPA limit set
worst single sample: 5.99 µg/L | 51/53 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 31.5 µg/L No EPA limit set
worst single sample: 37.6 µg/L | 51/53 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 11.755 µg/L No EPA limit set
worst single sample: 20.8 µg/L | 38/53 | SYR4 | 2012–2019 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2024 |
| Nitrate | 320 µg/L 3.2% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.351 µg/L No EPA limit set
worst single sample: 1.36 µg/L | 10/53 | SYR4 | 2012–2019 |
| Barium | 38.26 µg/L 1.9% of the EPA limit 2000 µg/L
worst single sample: 39.1 µg/L | 8/8 | SYR4 | 2013–2019 |
| Fluoride | 939.5 µg/L 23% of the EPA limit 4000 µg/L
worst single sample: 950 µg/L | 8/8 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 3.8675 µg/L No EPA limit set
worst single sample: 4.76 µg/L | 8/53 | SYR4 | 2012–2019 |
| Bromoform | 0.8800 µg/L No EPA limit set
worst single sample: 0.9000 µg/L | 2/53 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 0.5749 pCi/L 3.8% of the EPA limit 15 pCi/L
worst single sample: 0.6000 pCi/L | 2/2 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 280 µg/L 2.8% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2019 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Claywood Park Psd
Is Claywood Park Psd tap water safe to drink?
EPA monitoring detected 19 contaminants in Claywood Park Psd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Claywood Park Psd's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, TTHM, and others. The full list with the level and data source for each is above.
How many people does Claywood Park Psd serve?
Claywood Park Psd reports serving 8,141 people in West Virginia, per its EPA record.
Has Claywood Park Psd had any water quality violations?
The EPA has 411 violations on file for Claywood Park Psd, of which 20 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.