Tap WaterIndex

← West Virginia

Tap water quality report

Wayne Water Town of

EPA monitoring tested this supplier for 75 contaminants and detected 20. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

75
contaminants tested
20
detected
5,519
people served
66
health-based violations
West Virginia rankingsLead in West VirginiaPFAS in West Virginia
Water source
Surface water
Ownership
Local government
Counties served
Wayne

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

66
health-based violations
93
violations on file
44
still open
ViolationTypeStatusPeriod
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13
TT Health-based Unaddressed 2025-08-13

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
19.95 µg/L
No EPA limit set
worst single sample: 26.8 µg/L
56/56 SYR4 2012–2019
Chloroform
83.9 µg/L
No EPA limit set
worst single sample: 96.9 µg/L
56/56 SYR4 2012–2019
TTHM
106.068 µg/L 133%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 115.6 µg/L
56/56 SYR4 2012–2019
Dichloroacetic Acid
27.53 µg/L
No EPA limit set
worst single sample: 31.5 µg/L
55/55 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
53.49 µg/L 89%
of the EPA limit 60 µg/L
worst single sample: 59.8 µg/L
55/55 SYR4 2012–2019
Trichloroacetic Acid
29.47 µg/L
No EPA limit set
worst single sample: 31.9 µg/L
55/55 SYR4 2012–2019
Dibromochloromethane
4.316 µg/L
No EPA limit set
worst single sample: 7.62 µg/L
52/56 SYR4 2012–2019
Monochloroacetic Acid
2.804 µg/L
No EPA limit set
worst single sample: 3.19 µg/L
43/55 SYR4 2012–2019
Copper
71.575 µg/L 5.5%
of the EPA limit 1300 µg/L
worst single sample: 216 µg/L
42/60 SYR4 2012–2018
Lead
2 µg/L 13%
of the EPA limit 15 µg/L
worst single sample: 8 µg/L
22/60 SYR4 2012–2018
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 18/18 LCR 2027
Nitrate
360 µg/L 3.6%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Barium
32.16 µg/L 1.6%
of the EPA limit 2000 µg/L
worst single sample: 32.3 µg/L
8/8 SYR4 2012–2019
Fluoride
1036.5 µg/L 26%
of the EPA limit 4000 µg/L
worst single sample: 1040 µg/L
8/8 SYR4 2012–2019
Dibromoacetic Acid
1.625 µg/L
No EPA limit set
worst single sample: 1.67 µg/L
7/55 SYR4 2012–2019
Bromoform
0.6500 µg/L
No EPA limit set
worst single sample: 0.7000 µg/L
6/56 SYR4 2012–2019
Monobromoacetic Acid
3.8035 µg/L
No EPA limit set
worst single sample: 3.89 µg/L
2/55 SYR4 2012–2019
Dalapon
1 µg/L 0.5%
of the EPA limit 200 µg/L
 1/5 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
0.2770 pCi/L 1.8%
of the EPA limit 15 pCi/L
 1/1 SYR4 2013
cis-1,2-Dichloroethylene
1.05 µg/L 1.5%
of the EPA limit 70 µg/L
 1/9 SYR4 2012–2019
55 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, TotalO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
GRACE, DANNY
Phone
304-272-3231
Email
[email protected]

Frequently asked questions about Wayne Water Town of

Is Wayne Water Town of tap water safe to drink?

EPA monitoring detected 20 contaminants in Wayne Water Town of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wayne Water Town of's water?

EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Wayne Water Town of serve?

Wayne Water Town of reports serving 5,519 people in West Virginia, per its EPA record.

Has Wayne Water Town of had any water quality violations?

The EPA has 93 violations on file for Wayne Water Town of, of which 66 are health-based (a contaminant limit or required treatment was breached) and 44 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.