Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Archived | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Archived | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2024-01-01 → 2024-03-31 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
| MCL | Health-based | Resolved | 2021-04-01 → 2021-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 327.6 µg/L 25% of the EPA limit 1300 µg/L
worst single sample: 414 µg/L | 29/30 | SYR4 | 2012–2018 |
| Bromodichloromethane | 23.7 µg/L No EPA limit set
worst single sample: 26.6 µg/L | 21/21 | SYR4 | 2014–2019 |
| Chloroform | 113 µg/L No EPA limit set
worst single sample: 120 µg/L | 21/21 | SYR4 | 2014–2019 |
| Dibromochloromethane | 5.5 µg/L No EPA limit set
worst single sample: 5.7 µg/L | 21/21 | SYR4 | 2014–2019 |
| TTHM | 141 µg/L 176% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 143 µg/L | 21/21 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 21.78 µg/L No EPA limit set
worst single sample: 27.9 µg/L | 19/20 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 65.98 µg/L 110% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 95.5 µg/L | 19/20 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 49.78 µg/L No EPA limit set
worst single sample: 84.7 µg/L | 19/20 | SYR4 | 2014–2019 |
| Lead | 0.0026 mg/L 17% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Monochloroacetic Acid | 2.394 µg/L No EPA limit set
worst single sample: 2.61 µg/L | 10/20 | SYR4 | 2014–2019 |
| Lead | 3.31 µg/L 22% of the EPA limit 15 µg/L
worst single sample: 3.8 µg/L | 8/30 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 0.6365 µg/L No EPA limit set
worst single sample: 0.6450 µg/L | 3/20 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 2.566 µg/L No EPA limit set
worst single sample: 2.77 µg/L | 3/20 | SYR4 | 2014–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Harrisville
Is Harrisville tap water safe to drink?
EPA monitoring detected 13 contaminants in Harrisville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Harrisville's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Harrisville serve?
Harrisville reports serving 2,347 people in West Virginia, per its EPA record.
Has Harrisville had any water quality violations?
The EPA has 129 violations on file for Harrisville, of which 44 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.