Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2021-03-20 |
| TT | Health-based | Resolved | 2021-03-20 |
| TT | Health-based | Resolved | 2021-03-20 |
| TT | Health-based | Resolved | 2021-03-20 |
| TT | Health-based | Resolved | 2021-03-20 |
| TT | Health-based | Resolved | 2018-02-13 |
| TT | Health-based | Resolved | 2018-02-13 |
| TT | Health-based | Resolved | 2018-02-13 |
| TT | Health-based | Resolved | 2018-02-13 |
| TT | Health-based | Resolved | 2018-02-13 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1253.5 µg/L 96% of the EPA limit 1300 µg/L
worst single sample: 1440 µg/L | 30/30 | SYR4 | 2012–2018 |
| Chloroform | 51.425 µg/L No EPA limit set
worst single sample: 61.2 µg/L | 26/26 | SYR4 | 2012–2019 |
| TTHM | 57.55 µg/L 72% of the EPA limit 80 µg/L
worst single sample: 67.3 µg/L | 26/26 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.3 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 21/26 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 46.41 µg/L 77% of the EPA limit 60 µg/L
worst single sample: 75.1 µg/L | 20/26 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 25.8 µg/L No EPA limit set | 19/26 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 22.12 µg/L No EPA limit set
worst single sample: 49.3 µg/L | 19/26 | SYR4 | 2012–2019 |
| Lead | 0.0056 mg/L 37% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Lead | 11.65 µg/L 78% of the EPA limit 15 µg/L
worst single sample: 13 µg/L | 10/30 | SYR4 | 2012–2018 |
| Barium | 65.5 µg/L 3.3% of the EPA limit 2000 µg/L
worst single sample: 70 µg/L | 7/7 | SYR4 | 2012–2019 |
| Nitrate | 760 µg/L 7.6% of the EPA limit 10000 µg/L | 6/20 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.27 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 3/26 | SYR4 | 2012–2019 |
| Fluoride | 735 µg/L 18% of the EPA limit 4000 µg/L
worst single sample: 760 µg/L | 3/7 | SYR4 | 2012–2019 |
| Arsenic | 1.2 µg/L 12% of the EPA limit 10 µg/L | 1/7 | SYR4 | 2012–2019 |
| Di(2-ethylhexyl) Phthalate | 0.9750 µg/L 16% of the EPA limit 6 µg/L | 1/3 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.9000 µg/L No EPA limit set | 1/26 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 700 µg/L 7% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2018 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Cameron Water
Is Cameron Water tap water safe to drink?
EPA monitoring detected 17 contaminants in Cameron Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cameron Water's water?
EPA monitoring detected Copper, Chloroform, TTHM, Bromodichloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Cameron Water serve?
Cameron Water reports serving 962 people in West Virginia, per its EPA record.
Has Cameron Water had any water quality violations?
The EPA has 464 violations on file for Cameron Water, of which 51 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.