Is Logan Water Board City of Tap Water Safe? Quality Report

Water source: Surface water
Ownership: Local government
Counties served: Logan

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

health-based violations

483

violations on file

still open

Violation	Type	Status	Period
TT	Health-based	Resolved	2019-06-02
TT	Health-based	Resolved	2019-06-02
TT	Health-based	Resolved	2017-11-02
TT	Health-based	Resolved	2017-11-02
TT	Health-based	Resolved	2017-11-02
MR	Monitoring	Unaddressed	2025-12-30
MR	Monitoring	Unaddressed	2025-10-01
MR	Monitoring	Unaddressed	2025-10-01
MR	Monitoring	Resolved	2025-01-01 → 2025-03-31
MR	Monitoring	Resolved	2025-01-01 → 2025-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.

Contaminant	Level vs EPA limit	Detection rate	Source	Period
Copper	38.84 µg/L 3% of the EPA limit 1300 µg/L worst single sample: 201 µg/L	58/60	SYR4	2013–2019
Bromodichloromethane	18.06 µg/L No EPA limit set worst single sample: 21 µg/L	53/53	SYR4	2012–2019
Chloroform	26.5 µg/L No EPA limit set worst single sample: 39.7 µg/L	53/53	SYR4	2012–2019
Dichloroacetic Acid	17.14 µg/L No EPA limit set worst single sample: 20.6 µg/L	53/53	SYR4	2012–2019
TTHM	52.12 µg/L 65% of the EPA limit 80 µg/L worst single sample: 71.7 µg/L	53/53	SYR4	2012–2019
Total Haloacetic Acids (HAA5)	41.76 µg/L 70% of the EPA limit 60 µg/L worst single sample: 50.6 µg/L	53/53	SYR4	2012–2019
Trichloroacetic Acid	17.34 µg/L No EPA limit set worst single sample: 20.4 µg/L	53/53	SYR4	2012–2019
Dibromochloromethane	8.79 µg/L No EPA limit set worst single sample: 9.95 µg/L	52/53	SYR4	2012–2019
Lead	3.67 µg/L 24% of the EPA limit 15 µg/L worst single sample: 33.7 µg/L	39/60	SYR4	2013–2019
Monochloroacetic Acid	12.61 µg/L No EPA limit set worst single sample: 20.9 µg/L	35/53	SYR4	2012–2019
Nitrate	786.5 µg/L 7.9% of the EPA limit 10000 µg/L worst single sample: 800 µg/L	24/24	SYR4	2012–2019
Dibromoacetic Acid	3.25 µg/L No EPA limit set worst single sample: 3.37 µg/L	21/53	SYR4	2012–2019
Lead	0.0 mg/L 0% of the EPA limit 0.0150 mg/L	14/14	LCR	2025
Monobromoacetic Acid	13.465 µg/L No EPA limit set worst single sample: 14.7 µg/L	14/53	SYR4	2012–2019
Bromoform	1.3225 µg/L No EPA limit set worst single sample: 1.35 µg/L	12/53	SYR4	2012–2019
Barium	56.745 µg/L 2.8% of the EPA limit 2000 µg/L worst single sample: 66.3 µg/L	8/8	SYR4	2012–2019
Fluoride	5142.5 µg/L 129% of the EPA limit, at the 95th percentile of samples — 4000 µg/L worst single sample: 5860 µg/L	8/10	SYR4	2013–2019
Selenium	1.885 µg/L 3.8% of the EPA limit 50 µg/L worst single sample: 1.9 µg/L	4/8	SYR4	2012–2019
Nitrate-Nitrite	965 µg/L 9.7% of the EPA limit 10000 µg/L worst single sample: 1000 µg/L	2/2	SYR4	2015–2019
Nitrite	406.5 µg/L 41% of the EPA limit 1000 µg/L worst single sample: 410 µg/L	2/2	SYR4	2019
Gross Alpha, Excl. Radon And U	0.0540 pCi/L 0.4% of the EPA limit 15 pCi/L	1/1	SYR4	2019

55 contaminants tested, none detected

1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact: NOLLETTI, SERAFINO
Phone: 304-752-7870
Email: [email protected]

Frequently asked questions about Logan Water Board City of

Is Logan Water Board City of tap water safe to drink?

EPA monitoring detected 21 contaminants in Logan Water Board City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Logan Water Board City of's water?

EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.

How many people does Logan Water Board City of serve?

Logan Water Board City of reports serving 3,662 people in West Virginia, per its EPA record.

Has Logan Water Board City of had any water quality violations?

The EPA has 483 violations on file for Logan Water Board City of, of which 5 are health-based (a contaminant limit or required treatment was breached) and 10 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.