Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 355.6 µg/L 27% of the EPA limit 1300 µg/L
worst single sample: 705 µg/L | 30/30 | SYR4 | 2013–2019 |
| Bromodichloromethane | 13.455 µg/L No EPA limit set
worst single sample: 14.2 µg/L | 24/24 | SYR4 | 2014–2019 |
| Chloroform | 123.67 µg/L No EPA limit set
worst single sample: 180.5 µg/L | 24/24 | SYR4 | 2014–2019 |
| TTHM | 134.63 µg/L 168% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 196.2 µg/L | 24/24 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 32.92 µg/L No EPA limit set
worst single sample: 41.6 µg/L | 23/23 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 60.56 µg/L 101% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 73 µg/L | 23/23 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 28.37 µg/L No EPA limit set
worst single sample: 31.6 µg/L | 23/23 | SYR4 | 2014–2019 |
| Dibromochloromethane | 1.8 µg/L No EPA limit set
worst single sample: 2.18 µg/L | 21/24 | SYR4 | 2014–2019 |
| Lead | 0.00051 mg/L 3.4% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Lead | 84.2 µg/L 561% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 131 µg/L | 9/30 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.7882 µg/L No EPA limit set
worst single sample: 0.8000 µg/L | 5/23 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 2.625 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 4/23 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 0.9050 µg/L No EPA limit set | 1/23 | SYR4 | 2014–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about West Milford Water Works
Is West Milford Water Works tap water safe to drink?
EPA monitoring detected 13 contaminants in West Milford Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in West Milford Water Works's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does West Milford Water Works serve?
West Milford Water Works reports serving 645 people in West Virginia, per its EPA record.
Has West Milford Water Works had any water quality violations?
The EPA has 131 violations on file for West Milford Water Works, of which 20 are health-based (a contaminant limit or required treatment was breached) and 9 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.