Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Resolved | 2015-04-01 → 2015-06-30 |
| MCL | Health-based | Archived | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Archived | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Archived | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Archived | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Archived | 2008-04-01 → 2008-04-30 |
| Other | Monitoring | Resolved | 2025-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 12.755 µg/L No EPA limit set
worst single sample: 14.4 µg/L | 38/38 | SYR4 | 2013–2019 |
| Chloroform | 131.085 µg/L No EPA limit set
worst single sample: 143.7 µg/L | 38/38 | SYR4 | 2013–2019 |
| TTHM | 139.395 µg/L 174% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 157.1 µg/L | 38/38 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 34.47 µg/L No EPA limit set
worst single sample: 43 µg/L | 32/32 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 65.395 µg/L 109% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 78.7 µg/L | 32/32 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 36.12 µg/L No EPA limit set
worst single sample: 52.4 µg/L | 32/32 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.265 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 28/38 | SYR4 | 2013–2019 |
| Copper | 105.95 µg/L 8.2% of the EPA limit 1300 µg/L
worst single sample: 238 µg/L | 20/20 | SYR4 | 2014–2017 |
| Lead | 0.0021 mg/L 14% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Lead | 22 µg/L 147% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 26 µg/L | 11/20 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 2.57 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 3/32 | SYR4 | 2013–2019 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Stonewood City of
Is Stonewood City of tap water safe to drink?
EPA monitoring detected 11 contaminants in Stonewood City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Stonewood City of's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Stonewood City of serve?
Stonewood City of reports serving 2,236 people in West Virginia, per its EPA record.
Has Stonewood City of had any water quality violations?
The EPA has 100 violations on file for Stonewood City of, of which 9 are health-based (a contaminant limit or required treatment was breached) and 8 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.