Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2018-10-01 → 2018-12-31 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 14.065 µg/L No EPA limit set
worst single sample: 14.3 µg/L | 48/48 | SYR4 | 2014–2019 |
| Chloroform | 95.86 µg/L No EPA limit set
worst single sample: 161 µg/L | 48/48 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 25.165 µg/L No EPA limit set
worst single sample: 38.3 µg/L | 48/48 | SYR4 | 2014–2019 |
| TTHM | 110.53 µg/L 138% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 173.3 µg/L | 48/48 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 50.52 µg/L 84% of the EPA limit 60 µg/L
worst single sample: 80.1 µg/L | 48/48 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 32.015 µg/L No EPA limit set
worst single sample: 47.4 µg/L | 48/48 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.27 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 44/48 | SYR4 | 2014–2019 |
| Copper | 255.65 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 312 µg/L | 40/40 | SYR4 | 2014–2017 |
| Lead | 0.00027 mg/L 1.8% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2026 |
| Lead | 4.46 µg/L 30% of the EPA limit 15 µg/L
worst single sample: 5 µg/L | 13/40 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 1.54 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 9/48 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 2.265 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 4/48 | SYR4 | 2014–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Bridgeport City of
Is Bridgeport City of tap water safe to drink?
EPA monitoring detected 12 contaminants in Bridgeport City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bridgeport City of's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Bridgeport City of serve?
Bridgeport City of reports serving 10,775 people in West Virginia, per its EPA record.
Has Bridgeport City of had any water quality violations?
The EPA has 30 violations on file for Bridgeport City of, of which 16 are health-based (a contaminant limit or required treatment was breached) and 5 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.