Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
| TT | Health-based | Resolved | 2023-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 74.77 µg/L 5.8% of the EPA limit 1300 µg/L
worst single sample: 85.4 µg/L | 42/60 | SYR4 | 2013–2019 |
| Lead | 7.005 µg/L 47% of the EPA limit 15 µg/L
worst single sample: 17 µg/L | 30/60 | SYR4 | 2013–2019 |
| Lead | 0.00081 mg/L 5.4% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Nitrate | 90 µg/L 0.9% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.5800 µg/L No EPA limit set
worst single sample: 0.6000 µg/L | 5/8 | SYR4 | 2012–2019 |
| TTHM | 1.462 µg/L 1.8% of the EPA limit 80 µg/L
worst single sample: 1.56 µg/L | 5/8 | SYR4 | 2012–2019 |
| Barium | 18.87 µg/L 0.9% of the EPA limit 2000 µg/L
worst single sample: 19.2 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromodichloromethane | 0.5840 µg/L No EPA limit set
worst single sample: 0.6000 µg/L | 3/8 | SYR4 | 2012–2019 |
| Fluoride | 667 µg/L 17% of the EPA limit 4000 µg/L
worst single sample: 680 µg/L | 3/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 9.93 µg/L 17% of the EPA limit 60 µg/L
worst single sample: 10 µg/L | 3/8 | SYR4 | 2012–2019 |
| Bromoform | 0.9300 µg/L No EPA limit set
worst single sample: 0.9600 µg/L | 2/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 1.5452 µg/L No EPA limit set
worst single sample: 1.58 µg/L | 2/8 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 0.7782 pCi/L 5.2% of the EPA limit 15 pCi/L
worst single sample: 0.8100 pCi/L | 2/2 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 8.098 µg/L No EPA limit set
worst single sample: 8.44 µg/L | 2/8 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 7.7 µg/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 40 µg/L 0.4% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2019 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about White Sulphur Springs Water
Is White Sulphur Springs Water tap water safe to drink?
EPA monitoring detected 16 contaminants in White Sulphur Springs Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in White Sulphur Springs Water's water?
EPA monitoring detected Copper, Lead, Lead, Nitrate, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does White Sulphur Springs Water serve?
White Sulphur Springs Water reports serving 3,845 people in West Virginia, per its EPA record.
Has White Sulphur Springs Water had any water quality violations?
The EPA has 91 violations on file for White Sulphur Springs Water, of which 20 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.