Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2023-11-16 |
| Other | Monitoring | Resolved | 2023-11-16 |
| MR | Monitoring | Resolved | 2022-10-01 |
| MR | Monitoring | Resolved | 2022-10-01 |
| MR | Monitoring | Resolved | 2022-10-01 |
| MR | Monitoring | Resolved | 2022-10-01 |
| MR | Monitoring | Resolved | 2015-09-01 → 2016-08-31 |
| MR | Monitoring | Resolved | 2015-09-01 → 2016-08-31 |
| MR | Monitoring | Resolved | 2015-09-01 → 2016-08-31 |
| MR | Monitoring | Resolved | 2015-09-01 → 2016-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 63.775 µg/L 4.9% of the EPA limit 1300 µg/L
worst single sample: 243 µg/L | 36/61 | SYR4 | 2013–2019 |
| Lead | 0.00044 mg/L 2.9% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Lead | 32 µg/L 213% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 61 µg/L | 11/61 | SYR4 | 2013–2019 |
| Bromodichloromethane | 13.55 µg/L No EPA limit set
worst single sample: 15.4 µg/L | 6/6 | SYR4 | 2013–2019 |
| Bromoform | 15.625 µg/L No EPA limit set
worst single sample: 15.8 µg/L | 6/6 | SYR4 | 2013–2019 |
| Chloroform | 2.8 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 6/6 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 6.57 µg/L No EPA limit set
worst single sample: 7.16 µg/L | 6/6 | SYR4 | 2013–2019 |
| Dibromochloromethane | 18.9 µg/L No EPA limit set
worst single sample: 21 µg/L | 6/6 | SYR4 | 2013–2019 |
| TTHM | 45.5 µg/L 57% of the EPA limit 80 µg/L
worst single sample: 47.8 µg/L | 6/6 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 13.4125 µg/L 22% of the EPA limit 60 µg/L
worst single sample: 14.6 µg/L | 6/6 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.6045 µg/L No EPA limit set
worst single sample: 2.69 µg/L | 4/6 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 8.88 µg/L No EPA limit set | 1/6 | SYR4 | 2013–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Washington Pike Psd
Is Washington Pike Psd tap water safe to drink?
EPA monitoring detected 12 contaminants in Washington Pike Psd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Washington Pike Psd's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Washington Pike Psd serve?
Washington Pike Psd reports serving 2,967 people in West Virginia, per its EPA record.
Has Washington Pike Psd had any water quality violations?
The EPA has 22 violations on file for Washington Pike Psd, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.