Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2024-10-01 |
| Other | Monitoring | Resolved | 2023-10-01 |
| Other | Monitoring | Resolved | 2023-10-01 |
| Other | Monitoring | Resolved | 2023-05-14 |
| Other | Monitoring | Resolved | 2023-05-14 |
| Other | Monitoring | Resolved | 2023-05-14 |
| Other | Monitoring | Resolved | 2023-05-14 |
| MR | Monitoring | Unaddressed | 2022-12-30 |
| Other | Monitoring | Resolved | 2022-11-16 |
| Other | Monitoring | Resolved | 2022-11-16 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.00087 mg/L 5.8% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| Copper | 126.4 µg/L 9.7% of the EPA limit 1300 µg/L
worst single sample: 155 µg/L | 14/14 | SYR4 | 2013–2019 |
| Lead | 1.71 µg/L 11% of the EPA limit 15 µg/L
worst single sample: 1.8 µg/L | 7/14 | SYR4 | 2013–2019 |
| Bromodichloromethane | 12.9 µg/L No EPA limit set
worst single sample: 13.5 µg/L | 4/4 | SYR4 | 2016–2019 |
| Chloroform | 53.755 µg/L No EPA limit set
worst single sample: 54.7 µg/L | 4/4 | SYR4 | 2016–2019 |
| Dibromochloromethane | 1.504 µg/L No EPA limit set
worst single sample: 1.54 µg/L | 4/4 | SYR4 | 2016–2019 |
| TTHM | 65.1 µg/L 81% of the EPA limit 80 µg/L
worst single sample: 65.4 µg/L | 4/4 | SYR4 | 2016–2019 |
| Dichloroacetic Acid | 24.76 µg/L No EPA limit set
worst single sample: 25.5 µg/L | 3/3 | SYR4 | 2016–2018 |
| Monochloroacetic Acid | 3.797 µg/L No EPA limit set
worst single sample: 3.89 µg/L | 3/3 | SYR4 | 2016–2018 |
| Total Haloacetic Acids (HAA5) | 57.15 µg/L 95% of the EPA limit 60 µg/L
worst single sample: 57.4 µg/L | 3/3 | SYR4 | 2016–2018 |
| Trichloroacetic Acid | 28.6 µg/L No EPA limit set
worst single sample: 28.9 µg/L | 3/3 | SYR4 | 2016–2018 |
| Monobromoacetic Acid | 7.02 µg/L No EPA limit set | 1/3 | SYR4 | 2016–2018 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Philippi City of - Wellington Heights
Is Philippi City of - Wellington Heights tap water safe to drink?
EPA monitoring detected 12 contaminants in Philippi City of - Wellington Heights's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Philippi City of - Wellington Heights's water?
EPA monitoring detected Lead, Copper, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Philippi City of - Wellington Heights serve?
Philippi City of - Wellington Heights reports serving 246 people in West Virginia, per its EPA record.
Has Philippi City of - Wellington Heights had any water quality violations?
The EPA has 85 violations on file for Philippi City of - Wellington Heights, of which 0 are health-based (a contaminant limit or required treatment was breached) and 11 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.