Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2020-11-01 |
| TT | Health-based | Resolved | 2020-11-01 |
| TT | Health-based | Resolved | 2020-11-01 |
| TT | Health-based | Resolved | 2020-11-01 |
| MR | Monitoring | Resolved | 2015-07-01 → 2015-09-30 |
| MR | Monitoring | Resolved | 2015-07-01 → 2015-09-30 |
| MR | Monitoring | Resolved | 2015-07-01 → 2015-09-30 |
| MR | Monitoring | Resolved | 2015-07-01 → 2015-09-30 |
| MR | Monitoring | Resolved | 2015-07-01 → 2015-09-30 |
| MR | Monitoring | Resolved | 2015-07-01 → 2015-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1149 µg/L 29% of the EPA limit 4000 µg/L
worst single sample: 1220 µg/L | 102/198 | SYR4 | 2012–2019 |
| Copper | 455.5 µg/L 35% of the EPA limit 1300 µg/L
worst single sample: 750 µg/L | 90/90 | SYR4 | 2013–2019 |
| Lead | 11.56 µg/L 77% of the EPA limit 15 µg/L
worst single sample: 130 µg/L | 90/91 | SYR4 | 2013–2019 |
| Bromodichloromethane | 12 µg/L No EPA limit set
worst single sample: 13 µg/L | 61/71 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.35 µg/L No EPA limit set
worst single sample: 7.3 µg/L | 59/71 | SYR4 | 2012–2019 |
| Nitrate | 3830 µg/L 38% of the EPA limit 10000 µg/L
worst single sample: 4000 µg/L | 38/38 | SYR4 | 2012–2019 |
| Chloroform | 22.8 µg/L No EPA limit set
worst single sample: 33 µg/L | 37/71 | SYR4 | 2012–2019 |
| TTHM | 46.798 µg/L 58% of the EPA limit 80 µg/L
worst single sample: 49.8 µg/L | 20/20 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 15.461 µg/L 26% of the EPA limit 60 µg/L
worst single sample: 15.67 µg/L | 20/20 | SYR4 | 2012–2019 |
| Lead | 0.0082 mg/L 55% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2025 |
| Tetrachloroethylene | 1.01 µg/L 20% of the EPA limit 5 µg/L
worst single sample: 1.1 µg/L | 19/60 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 7.99 µg/L No EPA limit set
worst single sample: 8.8 µg/L | 19/20 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.16 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 17/20 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.7 µg/L No EPA limit set | 15/20 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 2.9836 pCi/L 60% of the EPA limit 5 pCi/L
worst single sample: 4.279 pCi/L | 13/13 | SYR4 | 2012–2017 |
| Bromoform | 1.83 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 8/71 | SYR4 | 2012–2019 |
| Barium | 127.5 µg/L 6.4% of the EPA limit 2000 µg/L
worst single sample: 141 µg/L | 7/7 | SYR4 | 2013–2017 |
| Nitrate-Nitrite | 3940 µg/L 39% of the EPA limit 10000 µg/L
worst single sample: 4300 µg/L | 7/7 | SYR4 | 2013–2017 |
| Gross Alpha, Excl. Radon And U | 4.6635 pCi/L 31% of the EPA limit 15 pCi/L
worst single sample: 4.86 pCi/L | 4/4 | SYR4 | 2013–2019 |
| Combined Uranium | 1.3514 µg/L 4.5% of the EPA limit 30 µg/L
worst single sample: 1.4 µg/L | 3/3 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 0.5380 µg/L No EPA limit set
worst single sample: 0.5500 µg/L | 3/20 | SYR4 | 2012–2019 |
| Chromium | 1.092 µg/L 1.1% of the EPA limit 100 µg/L
worst single sample: 1.1 µg/L | 2/6 | SYR4 | 2014–2017 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 1/6 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 3 µg/L No EPA limit set | 1/20 | SYR4 | 2012–2019 |
| Selenium | 0.9000 µg/L 1.8% of the EPA limit 50 µg/L | 1/7 | SYR4 | 2013–2017 |
50 contaminants tested, none detected
Utility contact
Frequently asked questions about Marshfield Utilities
Is Marshfield Utilities tap water safe to drink?
EPA monitoring detected 25 contaminants in Marshfield Utilities's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Marshfield Utilities's water?
EPA monitoring detected Fluoride, Copper, Lead, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Marshfield Utilities serve?
Marshfield Utilities reports serving 18,815 people in Wisconsin, per its EPA record.
Has Marshfield Utilities had any water quality violations?
The EPA has 16 violations on file for Marshfield Utilities, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.