← Wisconsin

Tap water quality report

River Falls Waterworks

EPA monitoring tested this supplier for 74 contaminants and detected 20. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

74
contaminants tested
20
detected
16,000
people served
2
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Pierce

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

2
health-based violations
3
violations on file
1
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
Other Monitoring Unaddressed 2024-10-17

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Fluoride
910 µg/L 23%
of the EPA limit 4000 µg/L
worst single sample: 3800 µg/L
162/310 SYR4 2012–2019
Copper
350.5 µg/L 27%
of the EPA limit 1300 µg/L
worst single sample: 580 µg/L
60/60 SYR4 2014–2017
Lead
1.795 µg/L 12%
of the EPA limit 15 µg/L
worst single sample: 2.2 µg/L
48/60 SYR4 2014–2017
TTHM
4.77 µg/L 6%
of the EPA limit 80 µg/L
20/21 SYR4 2012–2019
Combined Radium (-226 And -228)
3.967 pCi/L 79%
of the EPA limit 5 pCi/L
worst single sample: 4.21 pCi/L
19/19 SYR4 2012–2017
Total Haloacetic Acids (HAA5)
2.03045 µg/L 3.4%
of the EPA limit 60 µg/L
worst single sample: 2.203 µg/L
18/21 SYR4 2012–2019
Barium
12.25 µg/L 0.6%
of the EPA limit 2000 µg/L
worst single sample: 13 µg/L
16/16 SYR4 2012–2019
Chloroform
2.825 µg/L
No EPA limit set
worst single sample: 2.9 µg/L
16/51 SYR4 2012–2019
Lead
0.00088 mg/L 5.9%
of the EPA limit 0.0150 mg/L
15/15 LCR 2023
Bromodichloromethane
1.3 µg/L
No EPA limit set
13/51 SYR4 2012–2019
Gross Alpha, Excl. Radon And U
5.2585 pCi/L 35%
of the EPA limit 15 pCi/L
worst single sample: 6.54 pCi/L
12/12 SYR4 2013–2017
Dichloroacetic Acid
1.955 µg/L
No EPA limit set
worst single sample: 2 µg/L
10/21 SYR4 2012–2019
Nitrate
380 µg/L 3.8%
of the EPA limit 10000 µg/L
8/60 SYR4 2012–2019
Dibromochloromethane
0.7210 µg/L
No EPA limit set
worst single sample: 0.7300 µg/L
7/51 SYR4 2012–2019
Dibromoacetic Acid
0.3350 µg/L
No EPA limit set
worst single sample: 0.3700 µg/L
6/21 SYR4 2012–2019
Arsenic
1.1 µg/L 11%
of the EPA limit 10 µg/L
1/16 SYR4 2012–2019
Ethylbenzene
1.1 µg/L 0.2%
of the EPA limit 700 µg/L
1/31 SYR4 2012–2019
Nitrate-Nitrite
370 µg/L 3.7%
of the EPA limit 10000 µg/L
1/16 SYR4 2012–2019
Trichloroacetic Acid
0.2400 µg/L
No EPA limit set
1/21 SYR4 2012–2019
Xylenes, Total
4.5 µg/L 0%
of the EPA limit 10000 µg/L
1/33 SYR4 2012–2019
54 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBeryllium, TotalBromoformChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDinosebDiquatEndothallEndrinGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Frequently asked questions about River Falls Waterworks

Is River Falls Waterworks tap water safe to drink?

EPA monitoring detected 20 contaminants in River Falls Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in River Falls Waterworks's water?

EPA monitoring detected Fluoride, Copper, Lead, TTHM, Combined Radium (-226 And -228), and others. The full list with the level and data source for each is above.

How many people does River Falls Waterworks serve?

River Falls Waterworks reports serving 16,000 people in Wisconsin, per its EPA record.

Has River Falls Waterworks had any water quality violations?

The EPA has 3 violations on file for River Falls Waterworks, of which 2 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.