Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 9100 µg/L 91% of the EPA limit 10000 µg/L
worst single sample: 9900 µg/L | 76/76 | SYR4 | 2012–2019 |
| Copper | 151 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 170 µg/L | 20/20 | SYR4 | 2014–2017 |
| Lead | 5.96 µg/L 40% of the EPA limit 15 µg/L
worst single sample: 7.1 µg/L | 20/20 | SYR4 | 2014–2017 |
| Lead | 0.0071 mg/L 47% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Total Haloacetic Acids (HAA5) | 0.5595 µg/L 0.9% of the EPA limit 60 µg/L
worst single sample: 0.5700 µg/L | 8/8 | SYR4 | 2013–2019 |
| TTHM | 3.52 µg/L 4.4% of the EPA limit 80 µg/L
worst single sample: 3.55 µg/L | 7/8 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.5240 µg/L No EPA limit set
worst single sample: 0.5400 µg/L | 5/8 | SYR4 | 2013–2019 |
| Barium | 84.25 µg/L 4.2% of the EPA limit 2000 µg/L
worst single sample: 85 µg/L | 4/4 | SYR4 | 2014–2017 |
| Bromoform | 1.0475 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 4/8 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.285 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 4/8 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 8420 µg/L 84% of the EPA limit 10000 µg/L
worst single sample: 8600 µg/L | 4/4 | SYR4 | 2014–2017 |
| Bromodichloromethane | 0.9770 µg/L No EPA limit set
worst single sample: 0.9800 µg/L | 3/8 | SYR4 | 2013–2019 |
| Fluoride | 128 µg/L 3.2% of the EPA limit 4000 µg/L
worst single sample: 130 µg/L | 3/4 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 1.3875 pCi/L 28% of the EPA limit 5 pCi/L
worst single sample: 1.4 pCi/L | 2/2 | SYR4 | 2014 |
| Dichloroacetic Acid | 0.1800 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Markesan Waterworks
Is Markesan Waterworks tap water safe to drink?
EPA monitoring detected 15 contaminants in Markesan Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Markesan Waterworks's water?
EPA monitoring detected Nitrate, Copper, Lead, Lead, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Markesan Waterworks serve?
Markesan Waterworks reports serving 1,365 people in Wisconsin, per its EPA record.
Has Markesan Waterworks had any water quality violations?
The EPA has no formal drinking-water violations on file for Markesan Waterworks.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.