Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2021-02-01 |
| MR | Monitoring | Resolved | 2021-02-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1216 µg/L 30% of the EPA limit 4000 µg/L
worst single sample: 1460 µg/L | 98/200 | SYR4 | 2012–2019 |
| Nitrate | 960 µg/L 9.6% of the EPA limit 10000 µg/L
worst single sample: 970 µg/L | 42/48 | SYR4 | 2012–2019 |
| Copper | 1100 µg/L 85% of the EPA limit 1300 µg/L | 20/20 | SYR4 | 2014–2017 |
| Lead | 7.275 µg/L 49% of the EPA limit 15 µg/L
worst single sample: 18 µg/L | 16/20 | SYR4 | 2014–2017 |
| Lead | 0.00041 mg/L 2.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Barium | 65.6 µg/L 3.3% of the EPA limit 2000 µg/L
worst single sample: 67 µg/L | 8/8 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 830 µg/L 8.3% of the EPA limit 10000 µg/L
worst single sample: 900 µg/L | 8/8 | SYR4 | 2014–2017 |
| Bromodichloromethane | 7.675 µg/L No EPA limit set
worst single sample: 8 µg/L | 6/6 | SYR4 | 2014–2019 |
| Chloroform | 35 µg/L No EPA limit set
worst single sample: 39 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.9 µg/L No EPA limit set
worst single sample: 3 µg/L | 6/6 | SYR4 | 2014–2019 |
| TTHM | 41.9775 µg/L 52% of the EPA limit 80 µg/L
worst single sample: 45.87 µg/L | 6/6 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 12.125 µg/L 20% of the EPA limit 60 µg/L
worst single sample: 13.8 µg/L | 6/6 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 2.892 pCi/L 58% of the EPA limit 5 pCi/L
worst single sample: 3.24 pCi/L | 5/5 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 2.62 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 5/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 9.86 µg/L No EPA limit set
worst single sample: 11 µg/L | 5/6 | SYR4 | 2014–2019 |
| Arsenic | 4.555 µg/L 46% of the EPA limit 10 µg/L
worst single sample: 4.6 µg/L | 4/8 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 0.2000 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
| Gross Alpha, Excl. Radon And U | 3.24 pCi/L 22% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2014 |
56 contaminants tested, none detected
Frequently asked questions about Florence Utility Commission
Is Florence Utility Commission tap water safe to drink?
EPA monitoring detected 18 contaminants in Florence Utility Commission's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Florence Utility Commission's water?
EPA monitoring detected Fluoride, Nitrate, Copper, Lead, Lead, and others. The full list with the level and data source for each is above.
How many people does Florence Utility Commission serve?
Florence Utility Commission reports serving 1,250 people, per its EPA record.
Has Florence Utility Commission had any water quality violations?
The EPA has 2 violations on file for Florence Utility Commission, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.