Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
| MCL | Health-based | Archived | 1998-07-01 → 1998-07-31 |
| MCL | Health-based | Resolved | 1994-09-01 → 1994-09-30 |
| MCL | Health-based | Resolved | 1994-09-01 → 1994-09-30 |
| MCL | Health-based | Resolved | 1994-09-01 → 1994-09-30 |
| MCL | Health-based | Resolved | 1994-09-01 → 1994-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1430 µg/L 36% of the EPA limit 4000 µg/L
worst single sample: 14000 µg/L | 126/223 | SYR4 | 2012–2019 |
| Copper | 190.5 µg/L 15% of the EPA limit 1300 µg/L
worst single sample: 290 µg/L | 60/60 | SYR4 | 2014–2017 |
| Lead | 4.165 µg/L 28% of the EPA limit 15 µg/L
worst single sample: 15 µg/L | 58/60 | SYR4 | 2014–2017 |
| Dibromochloromethane | 4.38 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 42/165 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.21 µg/L No EPA limit set
worst single sample: 6 µg/L | 40/165 | SYR4 | 2012–2019 |
| Chloroform | 4.78 µg/L No EPA limit set
worst single sample: 16 µg/L | 37/165 | SYR4 | 2012–2019 |
| Arsenic | 3.4 µg/L 34% of the EPA limit 10 µg/L
worst single sample: 3.6 µg/L | 31/35 | SYR4 | 2012–2017 |
| Nitrate | 359 µg/L 3.6% of the EPA limit 10000 µg/L
worst single sample: 380 µg/L | 28/60 | SYR4 | 2012–2019 |
| Bromoform | 3.46 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 25/165 | SYR4 | 2012–2019 |
| TTHM | 13.265 µg/L 17% of the EPA limit 80 µg/L
worst single sample: 16.4 µg/L | 20/20 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 3.183 µg/L 5.3% of the EPA limit 60 µg/L
worst single sample: 3.81 µg/L | 20/20 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.85 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 15/20 | SYR4 | 2012–2019 |
| Lead | 0.0100 mg/L 67% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Barium | 130 µg/L 6.5% of the EPA limit 2000 µg/L | 10/10 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 4.26 pCi/L 85% of the EPA limit 5 pCi/L
worst single sample: 4.9 pCi/L | 9/9 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 1.76 µg/L No EPA limit set
worst single sample: 2 µg/L | 9/20 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.265 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 8/20 | SYR4 | 2012–2019 |
| P-Dichlorobenzene | 5.31 µg/L 7.1% of the EPA limit 75 µg/L
worst single sample: 6 µg/L | 7/146 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 6.232 pCi/L 42% of the EPA limit 15 pCi/L
worst single sample: 6.28 pCi/L | 5/5 | SYR4 | 2014–2017 |
| Combined Uranium | 0.2800 µg/L 0.9% of the EPA limit 30 µg/L
worst single sample: 0.2810 µg/L | 3/3 | SYR4 | 2014 |
| Monobromoacetic Acid | 0.4560 µg/L No EPA limit set
worst single sample: 0.4600 µg/L | 3/20 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 319 µg/L 3.2% of the EPA limit 10000 µg/L
worst single sample: 320 µg/L | 3/10 | SYR4 | 2014–2017 |
| Thallium, Total | 0.3340 µg/L 17% of the EPA limit 2 µg/L
worst single sample: 0.3400 µg/L | 3/10 | SYR4 | 2014–2017 |
| Chromium | 1.5 µg/L 1.5% of the EPA limit 100 µg/L | 1/10 | SYR4 | 2014–2017 |
53 contaminants tested, none detected
Utility contact
Frequently asked questions about Whitewater Waterworks
Is Whitewater Waterworks tap water safe to drink?
EPA monitoring detected 24 contaminants in Whitewater Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Whitewater Waterworks's water?
EPA monitoring detected Fluoride, Copper, Lead, Dibromochloromethane, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Whitewater Waterworks serve?
Whitewater Waterworks reports serving 14,000 people in Wisconsin, per its EPA record.
Has Whitewater Waterworks had any water quality violations?
The EPA has 133 violations on file for Whitewater Waterworks, of which 27 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.