Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 1993-01-01 |
| Other | Monitoring | Resolved | 2013-10-01 |
| Other | Monitoring | Resolved | 2013-10-01 |
| Other | Monitoring | Resolved | 2012-06-12 |
| Other | Monitoring | Resolved | 2012-06-12 |
| Other | Monitoring | Resolved | 2012-06-12 |
| MR | Monitoring | Resolved | 2012-04-01 → 2012-06-30 |
| MR | Monitoring | Resolved | 2012-04-01 → 2012-06-30 |
| MR | Monitoring | Resolved | 2012-04-01 → 2012-06-30 |
| MR | Monitoring | Resolved | 2012-04-01 → 2012-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 4.805 µg/L No EPA limit set
worst single sample: 5.7 µg/L | 120/120 | SYR4 | 2012–2019 |
| Chloroform | 4.91 µg/L No EPA limit set
worst single sample: 8.1 µg/L | 120/120 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.8 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 120/120 | SYR4 | 2012–2019 |
| TTHM | 12.9 µg/L 16% of the EPA limit 80 µg/L
worst single sample: 16.8 µg/L | 120/120 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 6.558 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 10.5 µg/L | 119/120 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.805 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 100/120 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 0.8610 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 94/120 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.12 µg/L No EPA limit set
worst single sample: 5.9 µg/L | 89/120 | SYR4 | 2012–2019 |
| Lead | 5.925 µg/L 39% of the EPA limit 15 µg/L
worst single sample: 13 µg/L | 60/60 | SYR4 | 2014–2017 |
| Copper | 111 µg/L 8.5% of the EPA limit 1300 µg/L
worst single sample: 140 µg/L | 59/60 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 0.6220 µg/L No EPA limit set
worst single sample: 0.6400 µg/L | 19/120 | SYR4 | 2012–2019 |
| Lead | 0.0032 mg/L 21% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Monochloroacetic Acid | 1.5 µg/L No EPA limit set | 1/120 | SYR4 | 2012–2019 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Shorewood Waterworks
Is Shorewood Waterworks tap water safe to drink?
EPA monitoring detected 13 contaminants in Shorewood Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Shorewood Waterworks's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Shorewood Waterworks serve?
Shorewood Waterworks reports serving 13,535 people in Wisconsin, per its EPA record.
Has Shorewood Waterworks had any water quality violations?
The EPA has 27 violations on file for Shorewood Waterworks, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.