Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1997-09-01 → 1997-09-30 |
| MCL | Health-based | Resolved | 1997-09-01 → 1997-09-30 |
| MCL | Health-based | Resolved | 1997-09-01 → 1997-09-30 |
| MR | Monitoring | Resolved | 2012-01-01 |
| MR | Monitoring | Resolved | 2012-01-01 |
| Other | Monitoring | Resolved | 2008-10-01 |
| Other | Monitoring | Resolved | 2008-10-01 |
| Other | Monitoring | Resolved | 2008-10-01 |
| Other | Monitoring | Resolved | 2002-07-01 |
| Other | Monitoring | Resolved | 2002-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 5.285 µg/L No EPA limit set
worst single sample: 6.5 µg/L | 124/124 | SYR4 | 2012–2019 |
| TTHM | 15.79 µg/L 20% of the EPA limit 80 µg/L
worst single sample: 17.54 µg/L | 124/124 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 6.03 µg/L 10% of the EPA limit 60 µg/L
worst single sample: 8.4 µg/L | 123/124 | SYR4 | 2012–2019 |
| Chloroform | 6.875 µg/L No EPA limit set
worst single sample: 8.5 µg/L | 122/124 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.395 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 122/124 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 3.52 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 97/124 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 0.8725 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 96/124 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.73 µg/L No EPA limit set
worst single sample: 2 µg/L | 95/124 | SYR4 | 2012–2019 |
| Copper | 164.5 µg/L 13% of the EPA limit 1300 µg/L
worst single sample: 300 µg/L | 58/60 | SYR4 | 2014–2017 |
| Lead | 11 µg/L 73% of the EPA limit 15 µg/L
worst single sample: 22 µg/L | 58/60 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 0.5460 µg/L No EPA limit set
worst single sample: 0.5500 µg/L | 23/124 | SYR4 | 2012–2019 |
| Lead | 0.0084 mg/L 56% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Bromoform | 0.5400 µg/L No EPA limit set | 2/124 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 1.6 µg/L No EPA limit set | 1/124 | SYR4 | 2012–2019 |
30 contaminants tested, none detected
Utility contact
Frequently asked questions about Wauwatosa Waterworks
Is Wauwatosa Waterworks tap water safe to drink?
EPA monitoring detected 14 contaminants in Wauwatosa Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Wauwatosa Waterworks's water?
EPA monitoring detected Bromodichloromethane, TTHM, Total Haloacetic Acids (HAA5), Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Wauwatosa Waterworks serve?
Wauwatosa Waterworks reports serving 49,064 people in Wisconsin, per its EPA record.
Has Wauwatosa Waterworks had any water quality violations?
The EPA has 10 violations on file for Wauwatosa Waterworks, of which 3 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.