← Wisconsin

Tap water quality report

South Milwaukee Waterworks

EPA monitoring tested this supplier for 106 contaminants and detected 20. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

106
contaminants tested
20
detected
21,340
people served
0
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Milwaukee

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
95
violations on file
0
still open
ViolationTypeStatusPeriod
MON Monitoring Resolved 2023-06-01 → 2023-06-30
MON Monitoring Resolved 2023-06-01 → 2023-06-30
MON Monitoring Resolved 2023-06-01 → 2023-06-30
MON Monitoring Resolved 2023-06-01 → 2023-06-30
Other Monitoring Resolved 2020-02-01
Other Monitoring Resolved 2020-02-01
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31
MR Monitoring Resolved 2020-01-01 → 2020-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
17 µg/L
No EPA limit set
worst single sample: 19 µg/L
115/115 SYR4 2012–2019
Chloroform
48.6 µg/L
No EPA limit set
worst single sample: 72 µg/L
115/115 SYR4 2012–2019
Dibromochloromethane
6.23 µg/L
No EPA limit set
worst single sample: 8.8 µg/L
115/115 SYR4 2012–2019
Dichloroacetic Acid
20 µg/L
No EPA limit set
worst single sample: 27 µg/L
107/107 SYR4 2012–2019
TTHM
68.17 µg/L 85%
of the EPA limit 80 µg/L
worst single sample: 96.4 µg/L
107/107 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
39.239 µg/L 65%
of the EPA limit 60 µg/L
worst single sample: 50.7 µg/L
107/107 SYR4 2012–2019
Trichloroacetic Acid
18.7 µg/L
No EPA limit set
worst single sample: 22 µg/L
107/107 SYR4 2012–2019
Fluoride
1038.5 µg/L 26%
of the EPA limit 4000 µg/L
worst single sample: 1120 µg/L
104/200 SYR4 2012–2019
Dibromoacetic Acid
1.6 µg/L
No EPA limit set
worst single sample: 1.8 µg/L
96/107 SYR4 2012–2019
Copper
200 µg/L 15%
of the EPA limit 1300 µg/L
worst single sample: 340 µg/L
61/61 SYR4 2013–2017
Lead
14 µg/L 93%
of the EPA limit 15 µg/L
worst single sample: 47 µg/L
53/61 SYR4 2013–2017
Monobromoacetic Acid
1.3 µg/L
No EPA limit set
worst single sample: 1.9 µg/L
45/107 SYR4 2012–2019
Nitrate-Nitrite
550 µg/L 5.5%
of the EPA limit 10000 µg/L
16/16 SYR4 2012–2019
Lead
0.0077 mg/L 51%
of the EPA limit 0.0150 mg/L
15/15 LCR 2023
Barium
22 µg/L 1.1%
of the EPA limit 2000 µg/L
8/8 SYR4 2012–2019
Monochloroacetic Acid
1.865 µg/L
No EPA limit set
worst single sample: 1.9 µg/L
8/107 SYR4 2012–2019
Bromoform
0.7685 µg/L
No EPA limit set
worst single sample: 0.8000 µg/L
4/115 SYR4 2012–2019
Arsenic
1.19 µg/L 12%
of the EPA limit 10 µg/L
worst single sample: 1.2 µg/L
2/8 SYR4 2012–2019
Mercury
0.0693 µg/L 3.5%
of the EPA limit 2 µg/L
worst single sample: 0.0700 µg/L
2/8 SYR4 2012–2019
Combined Radium (-226 And -228)
1.4 pCi/L 28%
of the EPA limit 5 pCi/L
1/1 SYR4 2014
86 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Frequently asked questions about South Milwaukee Waterworks

Is South Milwaukee Waterworks tap water safe to drink?

EPA monitoring detected 20 contaminants in South Milwaukee Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in South Milwaukee Waterworks's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.

How many people does South Milwaukee Waterworks serve?

South Milwaukee Waterworks reports serving 21,340 people in Wisconsin, per its EPA record.

Has South Milwaukee Waterworks had any water quality violations?

The EPA has 95 violations on file for South Milwaukee Waterworks, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.