Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-08-01 → 2019-08-31 |
| MCL | Health-based | Resolved | 2019-08-01 → 2019-08-31 |
| MCL | Health-based | Resolved | 2019-08-01 → 2019-08-31 |
| MCL | Health-based | Resolved | 2019-08-01 → 2019-08-31 |
| MCL | Health-based | Resolved | 2019-08-01 → 2019-08-31 |
| MR | Monitoring | Resolved | 2023-06-01 |
| MR | Monitoring | Resolved | 2023-06-01 |
| MR | Monitoring | Resolved | 2023-06-01 |
| MR | Monitoring | Resolved | 2023-06-01 |
| MR | Monitoring | Unaddressed | 2012-01-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1410 µg/L 35% of the EPA limit 4000 µg/L
worst single sample: 1640 µg/L | 96/192 | SYR4 | 2012–2019 |
| Copper | 441.05 µg/L 34% of the EPA limit 1300 µg/L
worst single sample: 464 µg/L | 18/22 | SYR4 | 2014–2017 |
| Lead | 0.0151 mg/L 101% above the EPA limit of 0.0150 mg/L | 16/16 | LCR | 2024 |
| Nitrate | 2350 µg/L 24% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 11.4025 µg/L 76% of the EPA limit 15 µg/L
worst single sample: 13.3 µg/L | 12/22 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 37.2752 µg/L 62% of the EPA limit 60 µg/L
worst single sample: 44.12 µg/L | 7/7 | SYR4 | 2013–2019 |
| Bromodichloromethane | 3.72 µg/L No EPA limit set
worst single sample: 3.87 µg/L | 6/7 | SYR4 | 2013–2019 |
| Chloroform | 6.26 µg/L No EPA limit set
worst single sample: 6.53 µg/L | 6/7 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 35.775 µg/L No EPA limit set
worst single sample: 41.5 µg/L | 6/7 | SYR4 | 2013–2019 |
| TTHM | 15.063 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 15.77 µg/L | 6/7 | SYR4 | 2013–2019 |
| Dibromochloromethane | 4.6185 µg/L No EPA limit set
worst single sample: 4.89 µg/L | 4/7 | SYR4 | 2013–2019 |
| Bromoform | 2.995 µg/L No EPA limit set
worst single sample: 3.13 µg/L | 3/7 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.0322 µg/L No EPA limit set
worst single sample: 1.04 µg/L | 3/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.095 µg/L No EPA limit set
worst single sample: 2.21 µg/L | 3/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.1694 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 3/7 | SYR4 | 2013–2019 |
| Barium | 114 µg/L 5.7% of the EPA limit 2000 µg/L
worst single sample: 115 µg/L | 2/2 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 2329 µg/L 23% of the EPA limit 10000 µg/L
worst single sample: 2350 µg/L | 2/2 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 1.19 pCi/L 24% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Gross Alpha, Excl. Radon And U | 1 pCi/L 6.7% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2014 |
| Monobromoacetic Acid | 1.46 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Selenium | 0.8000 µg/L 1.6% of the EPA limit 50 µg/L | 1/2 | SYR4 | 2014–2017 |
52 contaminants tested, none detected
Utility contact
Frequently asked questions about Cassville Waterworks
Is Cassville Waterworks tap water safe to drink?
EPA monitoring detected 21 contaminants in Cassville Waterworks's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cassville Waterworks's water?
EPA monitoring detected Fluoride, Copper, Lead, Nitrate, Lead, and others. The full list with the level and data source for each is above.
How many people does Cassville Waterworks serve?
Cassville Waterworks reports serving 777 people in Wisconsin, per its EPA record.
Has Cassville Waterworks had any water quality violations?
The EPA has 12 violations on file for Cassville Waterworks, of which 5 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.