Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1997-01-01 → 1997-01-31 |
| MCL | Health-based | Archived | 1997-01-01 → 1997-01-31 |
| MCL | Health-based | Archived | 1997-01-01 → 1997-01-31 |
| MCL | Health-based | Archived | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Archived | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Archived | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Archived | 1996-08-01 → 1996-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0038 mg/L 25% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2023 |
| Nitrate | 170 µg/L 1.7% of the EPA limit 10000 µg/L | 4/14 | SYR4 | 2012–2019 |
| Bromodichloromethane | 0.7000 µg/L No EPA limit set | 2/4 | SYR4 | 2013–2017 |
| Bromoform | 6.47 µg/L No EPA limit set
worst single sample: 6.7 µg/L | 2/4 | SYR4 | 2013–2017 |
| Dibromoacetic Acid | 1.69 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 2/3 | SYR4 | 2013–2017 |
| Dibromochloromethane | 3.135 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 2/4 | SYR4 | 2013–2017 |
| TTHM | 10.305 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 10.6 µg/L | 2/2 | SYR4 | 2013–2014 |
| Total Haloacetic Acids (HAA5) | 2.735 µg/L 4.6% of the EPA limit 60 µg/L
worst single sample: 2.8 µg/L | 2/3 | SYR4 | 2013–2017 |
| Arsenic | 3 µg/L 30% of the EPA limit 10 µg/L | 1/1 | SYR4 | 2017 |
| Barium | 34 µg/L 1.7% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2017 |
| Fluoride | 150 µg/L 3.8% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2017 |
| Trichloroacetic Acid | 1.1 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2017 |
43 contaminants tested, none detected
Utility contact
Frequently asked questions about Cedarhearth Water
Is Cedarhearth Water tap water safe to drink?
EPA monitoring detected 12 contaminants in Cedarhearth Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cedarhearth Water's water?
EPA monitoring detected Lead, Nitrate, Bromodichloromethane, Bromoform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Cedarhearth Water serve?
Cedarhearth Water reports serving 37 people in Washington, per its EPA record.
Has Cedarhearth Water had any water quality violations?
The EPA has 138 violations on file for Cedarhearth Water, of which 15 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.